631711
18
Zoom out
Zoom in
Previous page
1/36
Next page
18
Installation and connection
Version with external cable duct (Fig. F)
Arrange the cables in the cable duct when placing the turntable
onto the mounting plate. Make sure that the cables are not crossed
over and that they are tightened so that they cannot be kinked.
Do not try to pull the cable out of the unit. This could damage the
cable or loosen the cable connections.
Place the turntable carefully on the mounting plate. The through
holes on the turntable must be perfectly aligned with the threads on
the mounting plate.
Apply a little sealing glue to the six threaded holes in the mounting
plate and screw the fastening screws into the thread.
Tighten the screws to a torque of 6 Nm.
The connecting cables should be fed into the interior of the vehicle
through a waterproof cable duct¹
)
.
The cables may not be crushed, kinked or damaged.
The connecting cables between the turntable and the connecting/
control unit may not be extended!
¹
)
These watertight cable ducts exist in the area of boating and yachting
technology, for example, so-called “cableports” and they can be
purchased in boating and yacht out tting stores.
Figure: F
*) (not included)
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kathrein CAP 310 - MobiSet 3 digital at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kathrein CAP 310 - MobiSet 3 digital in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kathrein CAP 310 - MobiSet 3 digital

Kathrein CAP 310 - MobiSet 3 digital Installation Guide - Dutch - 40 pages

Kathrein CAP 310 - MobiSet 3 digital Installation Guide - French - 36 pages

Kathrein CAP 310 - MobiSet 3 digital Installation Guide - Spanish - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info