Manual Kalkhoff Rohloff SpeedHub 500-14 (page 27 of 114) (English, German, Dutch, French, Italian)

780095

Zoom out

Zoom in

1/114

4.2.1 External gear mech OEM/OEM2

ThediagramsaboveshowtheexternalgearmechwiththecableroutingviathechainstayforusewiththeOEM2

axleplate andtheOEMaxleplate .A B

4.2.2Externalgear mechwithlongtorquearm

The diagrams above show the external gear mech in combination with the standard axle plate and the long torque arm.

When the external transfer box needs to be in the position shown in diagram , then the axle plate must be secured to

the inside of the long torque arm.

Mounting

321

4.3Aligning of the axle plate

To align (rotate) the axle plate, all axle plate screws (M4 25, Torx TX20) must first be removed. Rotate the axle plate

into the desired position and then reinsert the axle plate screws through the axle plate into the hub axle. Secure them

tightly (tightening torque: 3Nm/25in.lbs.).

To hold the axle in position (when removing the axle plate screws), use a 10mm wrench on the OEM and OEM2

versions or simply hold the long torque arm tightly on the standard axle plate versions (see fig. 1-3 below).

OEMaxleplate:Holdthesupport

blockwitha10mmwrenchwhile

loosening/tighteningtheaxleplate

screws.

Standardaxleplatewithlong

torquearm:Holdthetorquearm

tightlywhileloosening/tightening

theaxleplatescrews.

OEM2axleplate:Holdthefork

legcarefullywitha10mmwrench

whileloosening/tighteningtheaxle

platescrews.

Mounting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Rohloff SpeedHub 500-14 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 40.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kalkhoff Rohloff SpeedHub 500-14 Manual

Product: