780095

Kalkhoff Rohloff SpeedHub 500-14 Manual

29
Zoom out
Zoom in
Previous page
1/114
Next page
67
RohloffSPEEDBONE
MonkeyBone
5.1.2 with OEM axle plateRohloff SPEEDHUB 500/14
When mounting the wheel, the axle peg must be inserted into the long dropout slot first, followed by the support block.
Before closing the quick release lever (CC versions) or tightening the axle nuts (TS versions), check that both axle
pegs are sitting correctly within the dropout slots.
5.1.3 with OEM2 axle plateRohloff SPEEDHUB 500/14
When mouting the wheel, the OEM2 axle plate seat must locate itself around the support bolt or the support peg of the
. Before closing the quick release lever (CC versions) or tightening the axle nuts
(TS versions), check that both axle pegs are sitting correctly within the dropout slots and that the axle plate seat sits
correctly around the support bolt or peg of the Speedbone/MonkeyBone .
Rohloff SPEEDBONE / MonkeyBone
Axleplateseat
Supportbolt
OEMdropout
Axlepeg
Mounting
Supportbolt
Supportbolt
68
A
1 2 3
4 5
A
B
A T T E N T I O N
The chaintensionercomes
withamountingboltandfour
distancingwashers(3 1mm,1
3mm). Withthedistancingwashers,
itispossibletodistancethe
chaintensioner1mmto
6mmawayfromtheframe.
Rohloff
Rohloff
x x
Makesurethattheupperjockey
wheeliscorrectlyspacedwiththe
distancingwashers,sothatitsits
directlyunderneaththesprocket
(arrowed).
Thetableshowstherequireddis-
tance tobefilledbydistancing
washersinrelationtothedropout
thicknessandthechainlineused.
Whenmountingthe chain
tensionerinthiscorrectdistance
fromthedropout,itisguaranteed
thatthejockeywheelssitdirectly
underneaththesprocket.
B
Rohloff
Securethe chaintensioner,
sothattheendstoppeg sits
againstthebackofthegearhanger.
(5mmallenkey,tighteningtorque:
8Nm/70in.lbs.,lightlygreasethe
mountingbolt).
Rohloff
A
Ondropoutsthinnerthan7mm,the
useofthe13toothsprocket
(chainline58mm)willrequirethe
useofthelongermountingbolt.
Thisisavailableseparately(Art.
#8255).
5.2Chaintensioner
5.2.1 chaintensionerRohloff (Art.#8250)
The chaintensionerhasatensioncapacityof10chainlinks.Itismountedtothederailleurhanger. The
appropriatechainlineisadjustedbytheuseofthesuppliedwashers.
Rohloff
Dropout
Mounting
bolt
Distancing
washers
A [mm] B[mm] B[mm]
4 6 10
5 5 9
6 4 8
7 3 7
8 2 6
9 1 5
10 0 4
Chainline
54mm Chainline
58mm
Dropout
thickness
Mounting
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Rohloff SpeedHub 500-14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Rohloff SpeedHub 500-14 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 40.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info