780095

Kalkhoff Rohloff SpeedHub 500-14 Manual

25
Zoom out
Zoom in
Previous page
1/114
Next page
59
1 2 3
321
Mounted
viewfrominsidetheframe.
RohloffSPEEDBONE, Mounted
viewfromoutsidetheframe.
RohloffSPEEDBONE,
RohloffSPEEDBONE(Art.#8550)
withsecuringbolts.
3.5 OEM2 mouting using a Rohloff SPEEDBONE
The is mounted from the outer side of the frame and secured through the disc brake mounts
into the brake caliper (paying attention to the brake manufacturers tightening torques). The original caliper securing
bolts will be too short to mount through the and should, therefore, be replaced by the long
securing bolts.
Rohloff SPEEDBONE
Rohloff SPEEDBONE
Rohloff SPEEDBONE
3.4 OEM2 mounting with a support bolt
The support bolt assembly for OEM2 mounting consists of a bolt (M6 16), a washer and a locknut. It is secured
through the disc brake mounting hole of the dropout from the inside (tightening torque: 8Nm/71in.lbs.).
x
Mountedsupportbolt,
viewfrominsidetheframe.
Mountedsupportbolt,
viewfromoutsidetheframe.
Supportbolt
CCOEM2axleplate
Locknut
Washer
Support
bolt
Washer
Locknut
Mounting
3.5 OEM2 Mounting using a MonkeyBone
The MonkeyBone is secured to the inside of the disc-brake
mounts on the dropout. The disc-brake caliper itself is then bolted down onto
the MonkeyBone from above (uphold torque values from brake
manufacturer). Not compatible with frames with disc brake caliper mounts
positioned on the chainstays!
(IS-PM Adapter)
60
L
M
4 5
123
3.6 Brake discs
The uses a disc mount with a central diameter of 52mm and a stable four bolt mounting
system which in turn has a diameter of 65mm. The special brake disc must be additionaly ordered.
Rohloff SPEEDHUB 500/14
Rohloff
Theexternaltransferboxshould
notberemovedasthegearswithin
couldfalloutofsynchronisation.
Seechapter‘Service’,paragraph5.
"Exchangingofthegearmech".
Removethefiveaxleplatescrews
(M4 25- Torx TX20)alongwith
theaxleplate.Securetheexternal
transferboxinplacewithoneof
theseaxleplatescrews .
x
L
Placethebrakediscoverthe
externaltransferboxandlocate
overthecenterdiscmounting.Pay
closeattentiontothedirectional
rotationofthebrakedisc!
Placethefourmountingbolts
intopositionandscrewthemin
tightly(M8 0.75 8.5-5mmallen
key,tighteningtorque:
7Nm/61in.lbs.).Removetheaxle
platescrew fromtheexternal
transferboxandthenreplaceall
fiveaxleplatescrewsthroughthe
axleplateitselfandsecurethem
backtightlyintothehubaxle
(M4 25- Torx TX20,tightening
torque:
M
L
x x
x
OnOEMversions,theremovalof
theaxleplateisnotnecessary
whentheaxleplateliesdirecly
overtheexternaltransferbox(Pic
4). Thebrakedisccanbemounted
directlyoverthesetwo
components(fig.5).
A T T E N T I O N
Mounting
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kalkhoff Rohloff SpeedHub 500-14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Rohloff SpeedHub 500-14 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 40.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info