Manual Kalkhoff Rohloff SpeedHub 500-14 (page 24 of 114) (English, German, Dutch, French, Italian)

780095

Zoom out

Zoom in

1/114

When disassembling the crankset for use with the the middle and smallest chainring

will not need to be used, so they must be removed from the crankset. The chainring threaded bushes will be too long,

because they are no longer securing two chainrings. For this reason there are five chainring spacers included in the

small parts bag (to be found in every package). These should be placed over the threaded bushes before reassembling

the crankset, so that the single chainring can be properly and tightly secured. (chainrig bolts: 5mm allen key, lightly

greased, tightening torque: 7Nm/61in.lbs.).

Rohloff SPEEDHUB 500/14,

3.2 Crankset

The requires a chainline of 54mm. On bikes with three-ring cranksets, the middle

chainring sits on a chainline of 47.5mm (measured from the frame center). The largest chainring has a chainline of

54mm. On most MTB and Trekking bike cranksets, the largest chainring and bottom bracket can normally be reused

in conjunction with the

Rohloff SPEEDHUB 500/14

Rohloff SPEEDHUB 500/14.

Largestchainring

Middlechainring

Framecenter

SmallestChainring

Bottombracketshell

Chainstay

54mm

47.5mm

Mounting

1 2

4 53

Unscreweachofthegrubscrews

halfaturn,thisloosensthe

mountingringsothatthesprocket

cannowberemoved.Makesure

thepointedendsdonotloosenout

oftheholestheydrilledintothe

hubcasing.Removethemounting

ringandtightenupallthreegrub

screws¾ofaturn.

Lastlyregreasethesprocketthread

andscrewthesprocketbackonto

thedriver.

Removethesprocket(seechapter

"Service",paragraph3.‘Sprocket

reversing/replacing’).Cleanthe

sprocketandregreasethethread.

Placechainguide andthe

mountingring ontothehub

casingasshownabove,screwthe

sprocketbackonhand-tight. The

mountingringholdstheDHchain

guidethecorrectdistanceaway

fromthesprocket.

Thethreegrubscrews (M4 8-

2mm Allenkey)shouldbescrewed

inevenlyuntiltheyalltouchthe

hubcasing. Thentightenupall

threescrewsinrotationalorderone

completeturnatatimeuntilthey

drilltheirwayintothehubcasing

itself.Duringthisprocess,the

mountingringwillbetrapped

betweenthesprocketandthechain

guide.

P O I N T E R

The DHchainguidecan

onlybeusedinconjunctionwith

15,16and17toothsprockets.

Rohloff

3.3 DH chain guide (accessory for downhill)Rohloff

The DH chain guide (Art. #8291) for the prevents the possibility of the chain

springing off the sprocket and onto the hub casing under extreme riding conditions.

Rohloff Rohloff SPEEDHUB 500/14

Mounting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kalkhoff Rohloff SpeedHub 500-14 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 40.9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kalkhoff Rohloff SpeedHub 500-14 Manual

Product: