614766

Juki MO-644D Manual

13
Zoom out
Zoom in
Previous page
1/44
Next page
Presser foot lifter (To raise the presser foot by the presser foot lifter)
A For regular sewing operation (sewing a medium-weight material), raise the presser foot to
position (A) illustrated in the figure.
B When you sew a heavy-weight material, raise the presser foot to position (B) illustrated in
the figure, to provide more space between presser foot and throat plate.
Elevador del pie prensatelas (Para elevar el pie prensatelas)
A Para la operación de cosido normal (cosido de materiales de peso medio), eleve el pie
prensatelas hasta la posición (A) como se ilustra en la figura.
B Cuando usted quiera coser materiale pesado, eleve el pie prensatelas hasta la posición
(B) como se ilustra en la figura, de modo que quede espacio suficiente entre el pie
prensatelas y la placa de agujas.
Releveur de pied presseur (Pour relever le pied presseur avec le levier)
A Pour coudre un tissu ordinaire (tissu moyennement épais), relever le pied presseur à la
position (A) indiquée sur le schéma.
B Pour coudre un étoffe lourde relever le pied presseur à la position (B) indiquée sur le
schéma, afin d’augmenter l’espace entre le pied presseur et la plaque à aiguille.
Leva alzapiedino (Per sollevare il piedino premistoffa)
A Per alzare il piedino per cuciture normali (materiali di medio spessore) spingere la leva
alza piedino in alto fino al suo arresto (A), come in figura.
B Quando si cuce materiale pesante, spingere la leva alza piedino in posizione (B) come in
figura, ottenendo così più spazio tra il piedino e la placca ago.
Changing the presser foot
Be sure to turn the power switch OFF.
1. Raise the presser foot.
2. Turn the handwheel until the needles are fully raised.
3. Press point (C) illustrated in the figure, and the presser foot will be released.
4. To release the presser foot, raise the presser foot lifting lever to its highest position (B).
Then you can release the presser foot easily.
5. To attach the presser foot, place it so that presser foot pin comes exactly under the
groove in the holder. Lower the presser foot lifting lever and the presser foot will en
gage automatically.
Modo de cambiar el pie prensatelas
Asgúrese de posicionar en OFF el interruptor de alimentación.
1. Eleve el pie prensatelas.
2. Girar el volante de mano hacia que las agujas queden completamente levantadas.
3. Pulse el punto (C) como se ilustra en la figura, y quedará libre el pie prensatelas.
4. Para dejar libre el pie prensatelas, levante la palanca elevadora del pie prensatelas
hasta la posición más alta (B).
5. Para enganchar el pie prensatelas, colóquelo de modo que el vástago del mismo
quede exactamente debajo de la ranura en el retentor. Accione hacia abajo la palanca
elevadora del pie prensatelas y el pie quedará enganchado.
Changement du pied presseur
Toujours couper l’alimentation de courant à l’interrupteur.
1. Relever le pied presseur.
2. Tourner le volant jusqu’à ce que les aiguilles soient complètement relevées.
3. Appuyer sur le point marqué (C) sur le schéma, pour desserrer le pied presseur.
4. Pour dégager le pied presseur, placer son levier sur la position la plus haute (B). Le
pied presseur peut alors être retiré.
5. Pour fixer le pied presseur, le plaser de façon à se que la broche soit parfaitement
sous la rainure du support. Abaisser ensuite le levier de relevage du pied presseur,
qui s’encliquète alors automatiquement.
Sostituzione del piedino
Spegnere la macchina, l’interruttore principale su „O“ disinserito.
1. Alzare il piedino.
2. Girare il volantino in avanti per portare gli aghi nella loro posizione più alta.
3. Premere la leva di disinnesto (C). Il piedino si stacca dal gambo.
4. Alzare del tutto la leva alzapiedino e togliere poi il piedino.
5. Per montare il piedino posizionarlo sotto il gambo. L’incavo nel gambo deve trovarsi
esattamente sopra il perno nel piedino (D). Abbassare il gambo, il piedino si innesta
automaticamente.
7
Operation and function / Operación y función
Opération et fonction / Messa in servizio della macchina
B
A
C
D
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki MO-644D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki MO-644D in the language / languages: English, French, Italian, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Juki MO-644D

Juki MO-644D User Manual - German, Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info