614555

Juki DDL8700B-7 Manual

46
Zoom out
Zoom in
Previous page
1/51
Next page
– 44 –
1) Turn ON the power switch with switch ❻
and switch ❽ held pressed.
2) "KL.on" is displayed on indicator A with a blip to
make the key-lock function effective.
3) The panel returns to the normal operation after
displaying "KL.on" on the indicators.
4) While the key lock function is effective, "KL.on"
is displayed on the indicators when turning the
power ON.
5) When you carry out steps 1) to 3) in repetition, "KL.of" is displayed when turning the power ON and the
key lock function is rendered ineffective.
• "KL.on" display when turning the power ON
Display appears: The key lock function is effective.
Display does not appear: The key lock function is ineffective.
In the case the key lock function is effective, the operation of the panel will be as shown in the table below.
Switch operation of which is to be dis-
abled.
• Setting of the reverse feed stitching (❶, ❷, ❸ and ❹)
• Change of the sewing pattern (❺, ❻, ❼ and ❽)
• Change of the number of stitches (❾)
• Change of the sewing operation (󱀔, 󱀕, 󱀖 and 󱀗)
Switch operation of which is not to be
disabled.
• Compensating stitching in half-stitch steps (󱀓)
• Production support function (❼)
13. Selecting procedure of the key-lock function
Setting of the number of stitches for a pattern can be prohibited by enabling the key lock function.
❻
❽
Display section A
1) Referring to the explanation of "III-6. Setting of
functions" p.25, select function setting "n.95".
Then, press switch 󱀙.
2) Press and hold switch 󱀔.
3) The buzzer sounds after approximately one sec-
ond, and the setting data returns to the standard
setting value.
Do not turn OFF the power on the way
of initializing operation. Program of the
main unit may be broken.
4) Turn OFF the power switch and turn ON the power switch after closing the front cover. The machine re-
turns to the normal motion.
1. When you carry out the aforementioned operation, the neutral position correction value for
the pedal sensor is also initialized. It is therefore necessary to carry out automatic correc-
tion of the pedal sensor neutral position before using the sewing machine. (Refer "III-10.
Automatic compensation of neutral point of the pedal sensor" p.42.)
2. When you carry out the aforementioned operation, the machine-head adjustment values
and the function settings of the optional devices are also initialized. It is therefore neces-
sary to carry out adjustment of the machine head before using the sewing machine. (Refer
"IV-1. Adjusting the machine head" p.46.)
3. Even when this operation is performed, the sewing data set by the operation panel cannot
be initialized.
14. Initialization of the setting data
All contents of function setting can be returned to the standard set values.
󱀙
󱀔
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info