614555
44
Zoom out
Zoom in
Previous page
1/51
Next page
– 42 –
10. Automatic compensation of neutral point of the pedal sensor
Whenever the pedal sensor, spring, etc. are replaced, be sure to perform following operation :
1) Pressing switch 󱀕, turn ON the power
switch.
The panel display is as illustrated in the gure.
The value indicated on the right side of "PA.",
at this time, is the compensation value. (In this
gure, the correction value is "1".)
2) The neutral position of the pedal is stored in
memory. Turn the power OFF to nish the proce-
dure.
In the case " " is displayed:
The pedal sensor is not properly connected. Turn the power OFF and check the connection of
the pedal sensor.
In the case " " is displayed:
It is necessary to adjust the installation of the pedal. Carry out the adjustment of the installa-
tion of the pedal according to the below-stated "How to adjust the pedal".
If you place your foot or any object on the pedal, the pedal will not operate properly. Operate
the pedal with nothing placed on it.
a) Check the digit which ashes on and off to determine the direction of pedal dislocation.
In the case the pedal sensor neutral position
is displaced toward the front part of the pedal.
In the case the pedal sensor neutral position
is displaced toward the rear part of the pedal.
Flashes on and off Flashes on and off
b) Adjust the installation of the pedal so that the indication " " is displayed. (Refer to the Engineer's
Manual for how to adjust the pedal.)
Correct the pedal in the direction to correct the pedal dislocation. When the dislocation is reduced to be
within the permissible range, " " is displayed.
c) Press switch 󱀙. The indication is changed to the state described in 1).
d) Now, the pedal adjustment is completed. Turn the power OFF.
How to adjust the pedal
󱀕
󱀙
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info