614555
43
Zoom out
Zoom in
Previous page
1/51
Next page
– 41 –
Function of pedal curve selection (Function setting No. 87)
This function can perform the selection of the curve of sewing speed of the sewing machine against the
depressing amount of the pedal.
Change to this function when you feel that inching operation is hard or that pedal response is slow.
n.
78
0 : Sewing speed in terms of the depressing amount of the pedal increases linearly.
1 : Reaction to intermediate speed in terms of the depressing amount of the pedal is de-
layed.
2 : Reaction to intermediate speed in terms of the depressing amount of the pedal is ad-
vanced.
Sewing speed (sti/min)
Pedal stroke (mm)
0
1
2
Initial motion UP stop position move function (Function setting No. 90)
Effective/ineffective of automatic return to UP stop position immediately after turning ON the power can be
set.
n.
09
0 : Ineffective
1 : Effective
󰚜 Function added to the needle up / down compensating switch (Function setting No. 93)
One stitch operation can be performed only when the needle up / down compensating switch is pressed
at the time of upper stop immediately after turning ON the power switch or upper stop immediately after
thread trimming.
n.
39
0 : Normal (Only needle up / down compensating stitching operation)
1 : One stitch compensating stitching operation (upper stop / upper stop) is performed
only when aforementioned changeover is made.
󰚧 Setting of max. sewing speed (Function setting No. 96)
This function can set the max. sewing speed you desire to use.
Upper limit of the set value varies in accordance with the sewing machine head to be connected.
n.
69
Setting range : 150 to MAX. sti/min <50 / sti/min>
󰚨 Main shaft reference angle compensation (Function setting No. 120)
Main shaft reference angle is compensated
n.
01 2
Setting range : – 50 to 50˚ <1 / ˚>
󰚩 UP position starting angle compensation (Function setting No. 121)
Angle to detect UP position starting is compensated.
n.
11 2
Setting range : – 15 to 15˚ <1 / ˚>
󰚪 DOWN position starting angle compensation (Function setting No. 122)
Angle to detect DOWN position starting is compensated.
n.
21 2
Setting range : – 15 to 15˚ <1 / ˚>
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Juki DDL8700B-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Juki DDL8700B-7 in the language / languages: English as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info