602018

Janome Memory Craft 10001 Manual

175
Zoom out
Zoom in
Previous page
1/181
Next page
174
Troubleshooting
Problem
The machine is
noisy.
The needle thread
breaks.
The bobbin thread
breaks.
The needle breaks.
Visual Touch
Screen is not clear.
PC Card does not
work.
Skipped stitches
Reference
See page 173.
See page 173.
See page 14.
See page 41.
See page 18.
See page 18.
See page 19.
See page 123.
See
page 13.
See page 173.
Replace the bobbin.
See page 18.
See page 18.
See page 18.
See page 41.
See page 34.
See page 19.
See page 26.
See page 144.
See page 18.
See page 18.
See page 19.
See page 19.
See page 18.
Change the needle.
See page 122.
See page 121.
Cause
1. Threads have been caught in the hook
mechanism.
2. The feed dog is packed with lint.
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is inserted incorrectly.
5. The thread is too heavy for the needle.
6. The needle thread is not set in the thread holder
when embroidery sewing has started.
1. The bobbin thread is not threaded properly in the
bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and doesn’t turn
smoothly.
1. The needle is inserted incorrectly.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The fabric is not drawn to the rear when sewing is
finished.
6. The needle is too fine for the fabric being sewn.
1. The contrast of the screen is not adjusted
properly.
1.
PC
Card is not set correctly.
1. The needle is inserted incorrectly.
2. The needle is bent or blunt.
3. The needle and/or threads are not suitable for the
work being sewn.
4. A BLUE TIPPED needle is not being used for the
sewing stretch, very fine and synthetics.
5. The needle thread is not threaded properly.
6. The defective (rusted, burred needle eye) needle
is used.
7. The embroidery hoop is not set properly.
8. The fabric is not pulled tightly enough on the
embroidery hoop.
… 175 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 10001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 10001 in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info