Manual Janome Memory Craft 10001 (page 173 of 181) (English)

602018

173

Zoom out

Zoom in

1/181

172

Replacing a Light Bulb

WARNING:

• Turn the power switch off and disconnect

the power supply plug from the outlet

before replacing the bulb.

• Be careful not to touch the bulb while

it is hot. Wait until the lamp has

cooled down before touching it.

The Memory Craft 10001 is equipped with

dual sewing lights. One is located behind the

Face Plate and the other is on the underside

of the sewing arm.

To replace the light bulb behind the Face

Plate:

Open the Face Plate.

Remove the rubber Lamp Socket from the

Lamp Holder.

Pull out the bulb from the socket.

Insert a new Light Bulb into the socket,

making sure to align the Pins with the holes

on the socket.

Snap the socket back into the holder and

close the Face Plate.

1 Face Plate

2 Lamp Socket

3 Lamp Holder

4 Light Bulb

5 Pins

To replace the light bulb on the

underside of the sewing arm:

Lay the machine on its back.

Remove the Clear Window with the screw-

driver as shown.

Remove the rubber Lamp Socket from the

window.

Pull out the Light Bulb from the socket.

Insert a new bulb into the socket, making

sure to align the Pins with the holes on the

socket.

Snap the socket back into the fork on the

window.

Insert the window back into the opening on

the machine.

6Clear Window

7 Lamp Socket

8 Light Bulb

9 Pins

CARE OF YOUR MACHINE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 10001 in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 10001 Manual

Product: