Manual Janome Memory Craft 10001 (page 176 of 181) (English)

602018

176

Zoom out

Zoom in

1/181

175

1. The needle tension is too tight.

2. The needle thread or the bobbin thread is not

threaded correctly.

3. The needle is too heavy for the fabric being sewn.

4. The stitch length is too long for the fabric.

5. The presser foot pressure is not adjusted correctly

*When sewing extremely lightweight materials place

interface underneath the fabric..

6. The fabric is not pulled tightly enough on the

embroidery hoop.

1. The presser foot pressure is not adjusted correctly

2. The correct presser foot is not being used.

1. The feed dog is packed with lint.

2. The presser foot pressure is too weak.

3. The stitches are too fine.

4. The fabric is not fed when sewing is starting.

5. The feed dog is lowered.

6. The correct presser foot is not used.

1. The machine is not plugged in.

2. A thread is caught in the hook race.

3. The control circuit is not working correctly.

4. The start/stop button is used for ordinary sewing

with foot control plugged in.

1. Something is caught between the carriage and the

arm.

2. The carriage is touching something around the

machine.

Seam puckering

Slipping fabric

The cloth is not

feeding

smoothly.

The machine does

not run.

Strange sounds

occur when the

machine is

switched on.

See page 41.

See pages 13, 14.

See page 19.

Make stitches denser

See page 24.

See page 121.

See page 24.

See page 22

See page 173.

See page 24.

Make stitches coarser.

See page 35.

See page 24.

Use the correct foot.

See page 7.

See page 173.

Turn the switch off

and turn it on again.

See page 8.

See page 122.

Remove the object.

See page 122.

Problem

Cause

Reference

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 10001 in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome Memory Craft 10001 Manual

Product: