602018
177
Zoom out
Zoom in
Previous page
1/181
Next page
176
1. The correct presser foot is not used.
2. The needle thread tension is too light.
3. The stitch length is not suitable for the fabric being
sewn.
4. Feed balancing dial is not properly set.
5. Interfacing is not used for sewing stretch and very
fine fabrics.
6. The embroidery hoop Attaching Knob is loose.
7. The carriage is bumping into something around
the machine.
8. The fabric is not pulled tightly enough on the
embroidery hoop.
9. The fabric is caught or pulled for some reason
when sewing embroidery.
1. The stitch length is not suitable for the fabric being
sewn.
2. The feed balancing dial is not set properly.
3. Interfacing is not used with stretch fabric.
1.The bobbin winder spindle is in the winding
position.
2. The control circuit is not working correctly.
3.The control circuit is not working correctly.
4.Key position is out of alignment.
1. The needle threader is locked in the lowered
position.
Patterns are
distorted.
The automatic
buttonhole
stitches are not
balanced.
Pattern selection
keys do not
work.
Automatic
needle threader
does not work.
Use the correct foot.
See page 41.
See pages 37, 49.
See page 117.
Use an interfacing.
See page 122.
See page 122.
See page 121.
Stop the machine and free
the fabric.
See page 61.
See page 117.
Use an interfacing.
See page 11.
Turn the switch off and turn it
on again.
Turn the switch off and turn it
on again.
See page 27.
See page 16.
Problem Cause
Reference
177


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome Memory Craft 10001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome Memory Craft 10001 in the language / languages: English as an attachment in your email.

The manual is 4,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info