641102

Janome DC2030 - JNH1860 Manual

37
Zoom out
Zoom in
Previous page
1/44
Next page
35
q
ew
r
Button Sewing
q Stitch pattern: 07
w Needle thread tension: 3 to 7
e Presser foot: Satin stitch foot F
r Feed dog: Dropped
z Lower the feed dog.
x Match the holes of button to the horizontal slot on the
presser foot.
c Lower the foot to hold the button in place.
v Adjust the stitch width so the needle will enter the left
hole of the button.
b Tu rn the handwheel so that the needle will enter the
right hole of the button. Readjust the stitch width if
necessary.
n Stitch several times.
z x c v b n
m ,
m After you finish sewing, cut the thread but leave
3˝ to 4˝ of thread at the button.
, With a hand sewing needle, draw the top thread to
the reverse side of the fabric and knot the threads.
* After the button sewing is completed, raise the feed
dogs for normal sewing.
q
ew
Shelltuck Stitch
q Stitch pattern: 11
w Needle thread tension: 6 to 8
e Presser foot: Satin stitch foot F
Use a lightweight fabric (tricot, for example). Fold the
fabric as shown and stitch on the fold. Allow the needle
to just clear the folded edge to create a shelled edge.
You may need to increase the needle thread tension
slightly.
If you sew rows of shell stitches, space the rows at least
5/8˝ (1.5 cm) apart. You can also sew shell stitches on
knits or soft silky woven fabrics, in any direction.
SECTION IV. DECORATIVE STITCHING
… 37 …


Need help? Post your question in this forum.

Forumrules
1

Forum

janome-dc2030---jnh1860

Reset search

  • Are the Janome JNH1860 AND THE JNH2030 the same machine? Submitted on 23-1-2023 at 21:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC2030 - JNH1860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC2030 - JNH1860 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info