Manual Janome DC2030 - JNH1860 (page 42 of 44) (English)

641102

Zoom out

Zoom in

1/44

Audible signal

Pip

Pip-pip-pip

Pip-pip-peep

Peep

The buzzer sounds when:

Normal operation

Invalid operation

Buttonhole sewing completed

Malfunction

Problems and Warning Signs

Cause Try this

The machine will not sew with the start/stop button

because the foot control is connected.

Disconnect the foot control

and start the machine.

Warning sign

Lower the buttonhole lever

and restart the machine.

A buttonhole is sewn without lowering the

buttonhole lever.

The bobbin winder spindle is moved to the right.

Move the bobbin winder

spindle to the left.

The machine is restarted too soon after it has

halted due to the overload.

Wait for at least 15 seconds to

restart. If threads are

jamming, remove the

jammed threads.

Are the Janome JNH1860 AND THE JNH2030 the same machine? Submitted on 23-1-2023 at 21:57
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC2030 - JNH1860 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Janome DC2030 - JNH1860 Manual

Product: