641102
35
Zoom out
Zoom in
Previous page
1/44
Next page
33
x
c
i
o
v
!0
!1
b n
!2
m
Zipper Sewing (continued)
x Attach the zipper foot with the pin on the right. Sew
through all the layers from the end of the zipper
opening, guiding the zipper teeth along the edge of
the foot.
c Stop the machine 2˝ (5 cm) before the foot reaches
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Open the zipper, then
lower the foot and stitch the remainder of the
seam.
i Slider
o 2˝ (5 cm)
v Close the zipper and open the upper fabric flat over
the zipper. Baste the upper fabric and zipper tape
together.
!0 Basting stitch
b Detach the foot and attach it with the pin on the
left. Backstitch across the end of opening 3/8˝ (1 cm).
Tu rn the fabric 90 degrees and stitch through the
garment and zipper tape.
!1 Backstitch
n Stop the machine 2˝ (5 cm) before the foot reaches
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Remove the basting
stitches.
!2 Basting stitches
m Open the zipper, then lower the foot and stitch the
remainder of the seam.
After finished sewing, remove the basting stitches on
the upper fabric.
35


Need help? Post your question in this forum.

Forumrules
1

Forum

janome-dc2030---jnh1860

Reset search

  • Are the Janome JNH1860 AND THE JNH2030 the same machine? Submitted on 23-1-2023 at 21:57

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Janome DC2030 - JNH1860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Janome DC2030 - JNH1860 in the language / languages: English as an attachment in your email.

The manual is 4,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info