Many bicycles have front forks which utilizes a secondary wheel retention device to keep the wheel from disengaging if the
quick release is incorrectly adjusted. Secondary retention devices are not a substitute for correct quick release adjustment.
Secondary retention devices fall into two basic categories:
The clip-on type is an accessory part which the manufacturer adds to the front wheel hub or front fork.a) The integral type is molded, cast or machined into the outer faces of the front fork dropouts.b) Ask your dealer to explain the particular secondary retention device on your bike.c)
WARNING: Removing or disabling the secondary retention device is extremely dangerous and may lead to serious injury
or death. It also may void the warranty.
3. Removing or Installing Quick Release Wheels
a) Removing a Quick Release Front Wheel
(1) Open up the brake shoes.
(2) Rotate the wheel’s quick-release lever from the locked or CLOSED position to the OPEN position.
(3) If your front fork does not have a secondary retention device go to step 5.
(4) If your front fork has a clip-on type secondary retention device, disengage it and go to step (5). If your
front fork has an integral secondary retention device, loosen the tension adjusting enough to allow removing
the wheel; then go to step (5).
(5) Raise the front wheel a few inches off the ground and tap the top of the wheel with the palm of your hand
to knock the wheel out of the front fork.
b) Installing a Quick Release Front Wheel
(1) Rotate the quick-release lever so that it curves away from the wheel. This is the OPEN position.
(2) With the steering fork facing forward, insert the wheel between the fork blades so that the axle seats firmly
at the top of the slots which are at the tips of the fork blades — the fork drop-outs. The quick-release lever
should be on the left side of the bicycle. If your bike has a clip-on type secondary retention device, engage it.
(3) Holding the quick-release lever in the OPEN position with your right hand, tighten the tension adjusting nut
with your left hand until it is finger tight against the fork dropout.
(4) While pushing the wheel firmly to the top of the slots in the fork dropouts, and at the same time centering
the wheel rim in the fork, rotate the quick-release lever upwards and push it into the CLOSED position (refer
to pages 56-57). The lever should be parallel to the fork blade and curved toward the wheel.
CAUTION: If you can fully close the quick release without wrapping your fingers around the fork blade for
leverage, and the lever does not leave a clear imprint in the palm of your hand, the tension is insufficient.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Izip Enlightened Series at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.
The manual is 6.51 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
