803711

Izip Enlightened Series Manual

127
Zoom out
Zoom in
Previous page
1/140
Next page
127
?
4. Removing and Installing Bolt-On Wheels
a. Removing a Bolt-On Front Wheel
(1) Open up the brake shoes.
(2) With a 15mm box wrench or a six inch adjustable wrench, loosen the two axle nuts.
(3) If your front fork has a clip-on type secondary retention device, disengage it and go to step (4). If your
front fork has an integral secondary retention device, loosen the axle nuts about six full turns; then go to step
(4).
(4) Raise the front wheel a few inches off the ground and tap the top of the wheel with the palm of your hand
to knock the wheel out of the fork ends.
b. Installing a Bolt-On Front Wheel
(1) With the steering fork facing forward, insert the wheel between the fork blades so that the axle seats firmly
at the top of the slots which are at the tips of the fork blades. The axle nut washers should be on the outside,
between the fork blade and the axle nut. If your bike has a clip-on type secondary retention device, engage it.
(2) While pushing the wheel firmly to the top of the slots in the fork dropouts, and at the same time centering
the wheel rim in the fork, use a six-inch adjustable wrench or a 15mm box wrench to tighten the axle nuts as
tight as you can.
(3) Close the brake shoes; then spin the wheel to make sure that it is centered in the frame and clears the
brake shoes.
c. Removing a Bolt-On Rear Wheel
(1) Open the rear brake shoes.
(2) Shift the rear derailleur to high gear (the smallest rear sprocket) and pull the derailleur body back with
your right hand
(3) With a 15mm box wrench or a six-inch adjustable wrench, loosen the two axle nuts.
(4) Lift the rear wheel off the ground a few inches and, with the derailleur still pulled back, push the wheel
forward and down until it comes out of the rear dropouts.
d. Installing a Bolt-On Rear Wheel
(1) Shift the rear derailleur to its outermost position and pull the derailleur body back with your right hand.
(2) Put the chain on to the smallest sprocket. Then, insert the wheel into the frame dropouts and pull it all the
way in to the dropouts. The axle nut washers should be on the outside, between the frame and the axle nut.
(3) Tighten the axle nuts as tightly as you can, using a six-inch adjustable wrench or a 15mm box wrench.
(4) Push the rear derailleur back into position.
(5) Close the brake; then spin the wheel to make sure that it is centered in the frame and clears the brake
shoes.
… 127 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Izip Enlightened Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Izip Enlightened Series in the language / languages: English as an attachment in your email.

The manual is 6.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info