658894
39
Zoom out
Zoom in
Previous page
1/98
Next page
TXG237
38
GROUND SPEED SELECTION
Hydrostatic Transmission
FIG. 4-4: The hydrostatic transmission provides vari-
able speed control in forward or reverse.
Range shift lever, 1, provides 2 major changes in
ground speed.
IMPORTANT: STOP Tractor whenever shifting range
shift lever 1.
Hydrostatic control pedal, 2, controls forward travel
speed. As pedal is progressively pushed down, a cor-
responding increase in ground speed will be noticed.
When released, pedal will return to neutral position.
Reverse travel speed is obtained by pushing the
rearward portion of the pedal downward. As pedal is
progressively pushed down, a corresponding increase
in ground speed will be noticed. When released, pedal
will return to neutral position.
IMPORTANT: For optimum operation, keep engine
speed above 2600 rpm whenever op-
erating the Hydrostatic control pedal.
TABLE 3: Arrangement of gear with appropriate
ground speeds, in order from slow to fast, are shown
in the chart at right.
NOTE: Ground speed indicated at 2600 engine rpm
with 26 x 12.00 - 12 agriculture type rear tires
and with 26 x 12.00 - 12 turf type rear tires.
GROUND SPEED SELECTION
FIG. 4-4
TABLE 3
SHIFT
POSITIONS
TXG237
Range km/h MPH km/h MPH
Tire Agri Turf
Forward
t
0 - 6.66 0 - 4.14 0 - 6.51 0 - 4.05
r
0 -14.20 0 - 8.82 0 -13.87 0 - 8.62
Reverse
t
0 - 4.99 0 - 3.10 0 - 4.88 0 - 3.03
r
0 -10.64 0 - 6.61 0 -10.40 0 - 6.46
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TXG237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info