658894
41
Zoom out
Zoom in
Previous page
1/98
Next page
TXG237
40
DIFFERENTIAL LOCK
FIG. 4-7: Differential lock pedal, 1, should only be de-
pressed when required as steering ability is greatly
reduced.
To engage differential lock, allow rear wheel move-
ment to stop. Depress lock pedal.
To disengage differential lock, release differential
lock pedal. Lock pedal should normally return to the
“OFF” position;
NOTE: On occasion, differential lock pedal may
remain, engaged due to torque difference
exerted by rear wheels, in this case, depress
the HST pedal while Tractor’s slowly in mo-
tion to release the pedal.
CAUTION: DO NOT use differential lock
on hard surfaces or when transporting
unit. DO NOT, engage with rear wheel(s)
spinning as severe damage may result.
DO NOT attempt to steer with the deffer-
ential lock engaged.
FOUR-WHEEL DRIVE
FIG. 4-8: Four-wheel drive models have a mechani-
cally driven front axle. Engagement and disengage-
ment of front drive axle is controlled by lever, 1, on
right side of tractor.
IMPORTANT: Prior to engaging or disengaging
4WD, Tractor stopped.
FIG. 4-9: When front axle is engaged, ground speed
of front tires is slightly faster than the ground speed of
rear tires. This is to assist steering when 4-wheel drive
is selected.
For this reason, front axle must be disengaged when
Tractor is transported of operated on a hard, dry sur-
face. Failure to do so will result in rapid wear of front
drive tires and possible driveline damage.
IMPORTANT: Always disengage front drive axle
when operating in, conditions with
minimal wheel slippage (DRY OR
HARD SURFACES). If tire replace-
ment is neccessary, identical replace-
ments must be installed to maintain
correct front/rear axle ratio.
1
1
FIG. 4-7
FIG. 4-8
FIG. 4-9
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Iseki TXG237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Iseki TXG237 in the language / languages: English as an attachment in your email.

The manual is 10,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info