695017

Inventum IKE6010 Manual

20
Zoom out
Zoom in
Previous page
1/56
Next page
OVERALL DIMENSIONS
The dimensions of the openings are given in mm in the diagram below.
580
560
45
490
510
min. 55*
min. 50*
min. 60*
* worktop and surrounding walls must be resistant to 100°C.
VENTILATION
The electronics in the hob require cooling. The hob will switch itself off after a short time if insufficient air is circulating and
overheating occurs. The ventilation openings are located on the underneath of the hob. Cool air must be able to be drawn
in through these openings. At the front the hob is fitted with outlet openings to discharge the hot air.
Ventilation takes place via the plinth and the back of the cabinet. Cut out the ventilation openings (min. 100 cm
2
). Air supply
via the plinth is superfluous if, in combination with the opening at the back of the cabinet, there is an opening somewhere
else where air can drawn in.
Ensure there is a sufficient supply and discharge of air.
• Make a ventilation opening at the front of the kitchen unit of at least the appliance width and with a height of at least 5
mm if the hob is installed above an oven, drawer or intermediate support.
• Ensure that there is minimum distance of 10 mm between the oven, the drawer or intermediate support and the hob.
The ventilation of the hob may make metal objects in the drawer hot. If this happens, we recommend you use an
intermediate support. That can be a wooden panel.
• Please note: if installed above an oven, the thickness of the worktop must be a minimum of 35 mm and above a drawer
the thickness of the worktop must be a minimum of 20 mm.
• Ensure the cross member does not obstruct the airflow. Cut or saw the cross member [C] diagonally if necessary.
Building-in above an oven - A Building-in above a drawer - B
20 • English
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKE6010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKE6010 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info