Manual Inventum IKE6010 (page 22 of 56) (English, German, Dutch, French)

695017

Zoom out

Zoom in

1/56

BUILDING

IN THE HOB

• Check whether the kitchen unit and the opening conform to the requirements in respect of measurements and

ventilation.

• Remove any wood shavings after the cutting work in the worktop opening and treat the cut edges of plastic or wooden

worktops with sealing varnish if necessary to prevent the worktop from swelling due to moisture.

• Lay the hob upside down on the worktop.

• Fit the connection cable to the hob in accordance with the set requirements.

• Fit the supplied A-clamps in the hob using the supplied screws.

Fitting option A is based on a 38-mm worktop and ﬁtting option B is based on a 28-mm worktop.

• For a thin worktop, we recommend placing extra wooden blocks to enable the clamps to be ﬁrmly ﬁtted.

• Turn the hob over and lay it in the opening.

• Connect the hob to the mains supply. The hob is now ready for use.

• Check the operation.

REMOVING THE HOB

Disconnect the appliance from the power supply. Remove the A-clamps and then remove the hob by exerting pressure

from underneath. Attention! Take care not to damage the appliance! Try not to remove the hob by levering it out of the

worktop from above.

560

094

nim

520

120260

560

094

nim

520

95260

5 4

1 2 3

1. Worktop

2. Screw

3. A-clamp

4. Hob

5. Sealing the hob

5 4

1 2 3

1. Worktop

2. Screw

3. A-clamp

4. Hob

5. Sealing the hob

6. Wooden block

A B

22 • English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKE6010 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum IKE6010 Manual

Product: