The timer function can be used to allow the appliance to switch on automatically (delayed start) or switch off automatically at a set time (automatic deactivation).
Delayed start
• Switch on the appliance and select the position you want to use.
• Switch off the appliance. The appliance remembers the last setting and will switch on at that position/temperature.
• Press the timer key [ timer / ] when the appliance is off. The indicator light - timer on - lights up.
• Press the [ and ] keys to select the required time for switching on. The required time at which you wish the air conditioner to switch on, will be extended by half an hour each
time, up to a total of 10 hours. If you want to delay the activation by more than 10 hours, an hour is added each time until a maximum of 24 hours.
• The set number of hours is shown in the display.
• Then press the timer key again within 5 seconds to confirm the setting.
• When the set number of hours have passed, the appliance switches on automatically.
To cancel the delayed start, hold down the timer key for 3 seconds. Once you switch on the appliance yourself, the timer mode is cancelled.
Automatic deactivation
• Press the timer key [ timer / ] when the appliance is on. The indicator light - timer off - lights up.
• Press the keys [ and ] to set the required time for switching off. The required time at which you wish the air conditioner to switch off, will be extended by half an hour each time,
up to a total of 10 hours. If you want to delay the deactivation by more than 10 hours, an hour is added each time until a maximum of 24 hours.
• The set number of hours is shown in the display. Once the temperature is shown on the display again, the setting has been confirmed.
• When the set number of hours have passed, the appliance switches off automatically.
To cancel automatic deactivation, hold down the timer key for 3 seconds. Once you switch off the appliance yourself, the timer mode is cancelled.
The settings can also be combined.
SLEEP MODE
Use the sleep mode when you want to use the appliance at night.
• Switch on the appliance in the cooling or auto position.
• Press the sleep mode key [ sleep / ] . The indicator light - sleep - lights up.
• If the display light on the appliance bothers you, you can switch it off by pressing the key on the remote control.
Press the key once more to reactivate the display light.
The sleep mode maintains the optimum temperature in the room, without excessive fluctuations in temperature and air humidity. Room temperature and air humidity vary slightly
tomake sure the room remains comfortable.
The selected temperature will rise every half hour by 1°C for a period of one hour. This new temperature is maintained for the next 7 hours. Then the appliance switches back to the set
temperature and remains on in accordance to its setting.
The sleep mode can be cancelled by pressing the key [ sleep / ] once more.
When using the air circulation and dehumidification positions, it is not possible to use the sleep mode.
THE REMOTE CONTROL
up keysleep mode
down keylock
ON/OFF keywind speed key
mode keytimer key on
swing keytimer key off
memory keydisplay light on/off on air
conditioner
i-SENSE key
Aim the remote control to the sensor of the appliance. The range of the remote control is approx. 8 metres (without obstacles between the appliance
and the remote control).
Caution: if you switched on the air conditioner on the appliance itself, you must first activate the remote control before you can control the appliance
with the remote control. Press the on/off key [ ] on the remote control to activate it.
Insert the two supplied AAA 1.5 Volt batteries in the remote control, as indicated in the drawing. Do take the plus and minus symbols on the inside
oftheremote control into account.
Note:
• If the remote control is replaced or is no longer used, remove the batteries and dispose them in accordance with applicable legislation, as they are
harmful to the environment.
• Do not mix old and new batteries. Do not use a mix of alkaline, standard (carbon-zinc) or chargeable (nickel-cadmium) batteries.
• Batteries could explode or leak when exposed to open fire. Hand in batteries at a waste collection facility or recognised waste collection point.
• Remove the batteries from the remote control when the appliance is not being used for a longer period of time (winter storage) and keep them
onacool, dry place.
Other functions
The remote control can be used for the same functions as described above. You can control extra functions via the remote control, such as the pre-set function and the i-sense function.
MEMORY FUNCTION
By means of the memory key [ ] you can set and save your favourite settings such as mode, wind speed and temperature.
• Press the memory key [ ] when the remote control is activated. By default,, the appliance goes back to the last settings of the cool mode.
• If you want to set different settings or a different mode, you switch on the appliance at the required position (e.g.: air circulation) with the required settings and press the memory
key [ ] for 2 seconds. If you then set the appliance to a different mode (e.g.: de-aeration) and press the memory key [ ], the appliance will return to the current memory setting
(according to the example to: air circulation).
i-SENSE FUNCTION
In the remote control you can see a temperature sensor. If you activate the i-SENSE function [ ] , the room temperature is measured from the location where the remote control
is located and not where the appliance is located. If, for example, you are a little further away from the appliance, it will cool longer in order to achieve the correct temperature on the
location where you are, on the condition that you have the remote control with you. The remote control transmits the temperature to the appliance every 3 minutes, until you switch off
the i-sense function again.
• In order to switch the i-SENSE function on or off, you hold down the i-SENSE key [ ] for 7 seconds while aiming the remote control to the appliance.
- When switching on, the text On appears on the display for 3 seconds to indicate that the function is active.
- When switching off, the text Off appears on the display for 3 seconds to indicate that the function is switched off.
• Switching the appliance on and off, changing the mode or a possible power failure do not affect the function when it is switched on.
• The i-SENSE function does not work for the de-aeration and air circulation modes.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Inventum AC127W at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Inventum AC127W in the language / languages: English, German, Dutch, French as an attachment in your email.
The manual is 4.21 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
