550038
10
Zoom out
Zoom in
Previous page
1/18
Next page
192
A
S AVE THESE INSTRUCTIONS
(192IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English
Page 10
SET UP (continued)
In ation
In ate the Spa Tub Wall
1. Take out the ground cloth (19) and spread it over the cleared area. Then spread out the spa liner over
the ground cloth and point the drain valve towards a suitable draining area.
2. Unscrew the control panel cap (5) on top of the control panel to reveal the air blower in ation outlet and
connect one end of the in ation hose (7) to the outlet (see drawing 3).
3. Unscrew the air valve cap to reveal the stem in the up position for in ation. Insert the other end of the
in ation hose (7) into the valve and turn to the right to lock it in position (see drawing 4).
4. Press the button to in ate the spa tub wall until it is rm to the touch but not hard (see drawing 5).
IMPORTANT: Do not over in ate or use high pressure air compressor to in ate.
5. Press the button again to turn it off.
6. Disconnect the in ation hose (7) from the air valve and attach the pressure gauge (23) to the air valve.
The pressure gauge indicator should be in the green area for a properly in ated spa tub (see
drawing 6). Repeat previous steps to add more air if necessary.
7. Replace the air valve cap back.
NOTE: The cap is designed to be screwed on and off. Never exert force as this could cause the
complete internal in ation system of the valve to come loose. See “Spa Tub Air Valve Fastening” for
valve maintenance.
In ate the Spa Cover Air Bladder
1. Open the in ation valve and insert the in ation
hose (7) into the valve; press to in ate
until it is rm to the touch but not hard (see
drawing 7).
2. Disconnect the in ation hose (7) from the air
blower in ation outlet and the valve.
3. Replace the control panel cap (5)
back; close and recess the in ation valve.
NOTE: If there is a need to add some air to the spa tub wall or spa cover air bladder after they have been
setup, refer to above “In ate the Spa Tub Wall” and “In ate the Spa Cover Air Bladder” sections.
5 6
23
˚C
˚F
40 C
o
7
7
3
7
5
4
7
12
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex Pure Spa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex Pure Spa in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex Pure Spa

Intex Pure Spa User Manual - German - 24 pages

Intex Pure Spa User Manual - Dutch - 19 pages

Intex Pure Spa User Manual - French - 21 pages

Intex Pure Spa Additional guide - All languages - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info