550038
12
Zoom out
Zoom in
Previous page
1/18
Next page
192
A
S AVE THESE INSTRUCTIONS
(192IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 06/28/2013
English
Page 12
OPERATION
SPA CONTROL UNIT PANEL
Heat Button: Use this button to activate the heating system. The pump will heat the
spa water until the water temperature reaches the set temperature. After the current water
temperature drops 2°C (3.6°F) below the set temperature the heating system will restart. When
the light above the heat button is red, the heating system is activated. When the light is green,
the water is at the set temperature and the heating system is at rest.
NOTE: If the heating system is activated the ltration system will automatically start.
NOTE: After turning off the heating system the ltration system will continue to operate 24 hours.
Celsius/Fahrenheit Toggle button:
The temperature can be displayed in either Fahrenheit or Celsius. The system’s default is
Celsius.
CAUTION: NEVER use the spa if indicated water temperature is more than 40°C (104ºF).
Temperature Adjustment Buttons: Pressing the Temperature Increase or Decrease
buttons will cause the LED to ash. When ashing you can adjust to the desired temperature
setting. If you hold these buttons down the values will rapidly increase or decrease. The new
and desired temperature setting will remain on the LED display for 5 seconds to con rm the new
value.
NOTE: The default temperature is 20°C (68°F).
NOTE: Temperature adjustment ranges from 20°C (68°F) to 40°C (104°F).
Water Filter Button:
This button turns the lter pump on and off.
The light above the Water Filter Button displays green when activated.
Bubble Button: Use this button to activate the massage system, which has a 30-minute
auto-shutoff feature. The light above the Bubble Button displays green when activated.
WARNING: Do not run Bubble system when the cover is attached, air can accumulate
inside the spa and cause irreparable damage and bodily harm.
LED Display: Once powered-up the LED displays the current water temperature automatically.
IMPORTANT: The following conditions will lead to slow water heating.
• The ambient temperature is lower than 10ºC (50ºF).
• Outdoor wind speed is above 3.5-5.4m/s (8-12 mph).
• The air bubble function is activated when heating the spa water.
• The spa is not properly covered with the spa cover when the water is heating.
A: Heat Button
B: Celsius/Fahrenheit Toggle Button
C: Temperature Increase Button
D: Temperature Decrease Button
E: Water Filter Button
F: Bubble Button
G: LED Display
˚C
˚F
Heating Reset
1. Be sure to press the “Reset” button on the spa control unit side
using a small and thin object before the rst time operation.
2. See “LED Code Chart” section.
RESET
˚C
˚F
40 C
o
F
E
D
C
B
AG
40 C
o
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex Pure Spa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex Pure Spa in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex Pure Spa

Intex Pure Spa User Manual - German - 24 pages

Intex Pure Spa User Manual - Dutch - 19 pages

Intex Pure Spa User Manual - French - 21 pages

Intex Pure Spa Additional guide - All languages - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info