738440
16
Zoom out
Zoom in
Previous page
1/30
Next page
STEP 19
1Plastic Ball
1Cable UBracket
1M6 x 12 Button Head Bolt
1M6 T Nut
1Spring Clip
STEP 20
Lower Cable
STEP 21
1Plastic Ball
1Cable UBracket
1M6 x 12 Button Head Bolt
1M6 T Nut
1Spring Clip
STEP 18
1 - M12 x 85 Hex Bolt
2 - M12 Flat Washers
1 - M12 Lock Nut
STEP 17a
2- M10 x 75 Hex Bolts
4 - M10 Flat Washers
2 - M10 Lock Nuts
Step 17b:
1 - M10 x 170 Hex Bolt
1 - M10 Lock Nut
1 - M10 Arc Washer
2 - M10 x 20 Hex Bolts
3 - M10 Washers
Step 17a: Attach Swivel Pulley Mounting Bracket to Main Base (Opposite side of top cable and Leg
Press). Finger tighten only now.
Step 17b: Attach U Bracket to Swivel Pulley Mounting Bracket so that the U is parallel to the floor.
Tighten bolts in 17a and 17b now.
Step 18: Attach Swivel Pulley to U Bracket. The bolt may also go up from the bottom.Tighten now.
Pulley housing must be able to swivel.
Step 19: Assemble one end of the Lower Cable as shown in Step 12. Slide the rubber washer against the ball. Tighten Now.
Step 20: Route the other end of the Lower Cable over Pulley 11 (front to back), down (between the two sides of the Middle
Cable), under Pulley 1 (front to back) and up to the front side and around the pulley in the Adjustable Pulley Bracket, then
down under the Swivel Pulley.
Pulley 11
Pulley 1
Adjustable Pulley
Bracket
Swivel
Pulley
Step 21: Assemble the second cable end
as shown in Step 12. Make sure the cable is
between the pulley and retainer pin in the
Swivel Pulley Bracket. Tighten Now.
U Bracket
PAGE 12
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire M2 in the language / languages: English as an attachment in your email.

The manual is 7,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info