738440
18
Zoom out
Zoom in
Previous page
1/30
Next page
Note: To assemble orthopedic
pads, place pad on Seat Base.
Work the edge of pad into the
groove of the Seat Base
on all sides.
Do not use sharp objects
during installation.
SeatBase
Seat Stem
Step 28b
Step 25
2M10 x 95 Hex Bolt
2M10 Flat Washers
Large Plastic Washer
Plastic Spacer Tube
Step 27
2M10 x 50 Hex Bolts
2M10 Flat Washers
Step 28a (upper)
2- M10 x 25 Flat Head Bolts
2- Aluminum End Caps
2- Roller Pads without
extension
2- Large Plastic Washers
2- Plastic Spacer Tubes
Step 28a (lower)
2- M10 x 25 Flat Head Bolts
2- Aluminum End Caps
2- Roller Pads with extension
Main Upright
Step 26
2M10 x 25
Flat Head Bolts
Step 25: Attach Head Pad to the Main Upright. Tighten Now.
Step 26: Attach Seat Base to the Back Pad Tilt Frame. Tighten Now.
Step 27: Insert Seat Stem into the Seat Base Frame, then attach the Seat Base to the Seat Stem. Tighten Now.
Insert Orthopedic Pads into the Seat Bases. See Note at top.
Step 28a: (Upper Roller Pads) Slide a Plastic Spacer Tube, Large Plastic Washer and Roller Pad on each side of upper L/E shaft. Secure
with Aluminum End Caps and Flat Head Bolts as shown. Tighten Now.
Attach lower Roller Pads (with extension on one side) to the L/E Assembly with the Roller Pad extension facing inward. Tighten Now.
Step 28b: Attach Thigh Pads to Seat Stem by sliding all the way on to rectangular tubes of Seat Stem.
PAGE 14
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire M2 in the language / languages: English as an attachment in your email.

The manual is 7,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info