738440

Inspire M2 Manual

15
Zoom out
Zoom in
Previous page
1/30
Next page
STEP16
1–Middle Cable
Floating
Pulley
Plates
Step 16: Take one pulley out of
the Floating Pulley Plates and hang
the Plates over the Upper Cable
loop. Reinstall the pulley that was
removed.
Attach the Middle Cable (eyelet) to
the Top Beam Plate (on the side
opposite where you want the low
pulley) using the M10 x 105 bolt
from Step 7 (put a washer on each
side of the cable loop end).
Route the Middle Cable down
between Pulley 13 and the retainer
pin, under Pulley 19 in the Floating
Pulley Bracket and up between
Pulley 12 and the retainer pin.
Now go up over the lower pulley in
the Floating Pulley Plates.
Top Beam
Pulleys
12 & 13
Pulley 19
Step 16 cont.: Remove the L
bracket in the Adjustable Floating
Pulley Bracket. Insert the cable
end in the Bracket as shown in
the circle and place the Cable
Adapter on the cable end.
Secure with the L bracket.
Tighten L bracket now.
Tighten Top Beam Bolt with
cable end now.
Adjustable Floating
Pulley Bracket
Cable Adapter
Note: Cable end must be attached to
the Top Beam Plate opposite of the
side you want the Low Pulley. If you
have the Leg Press Option, it will be on
the same side as the Leg Press!!
PAGE 11
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inspire M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inspire M2 in the language / languages: English as an attachment in your email.

The manual is 7,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info