800597

Innoliving INN-521 Manual

29
Zoom out
Zoom in
Previous page
1/44
Next page
29
the operation, a suitable interim solution must be used. This must be reported to
the owner of the equipment, so all parties are advised. Initial safety checks must
include: that the capacitors are discharged: this must be done safely to avoid the
possibility of sparks; that there are no live electrical components and exposed cables
while charging, recovering or purging the system; that there is continuity in the
earth connection.
2. REPAIRS TO SEALED COMPONENTS
1) During repairs to sealed components, all electrical connections must be disconnected
from the equipment being worked on before removing any sealed items. If it is
absolutely necessary to have an electrical power supply to the equipment during
maintenance, then it is necessary to have a leak detector constantly in operation,
thus locating which are the potentially most dangerous points.
2) When working on electrical components, pay special attention to the following to
ensure that the coating is not altered in a way that affects the level of protection.
This includes damage to cables, excessive number of connections, terminals not
conforming to original specifications, damage to gaskets, incorrect assembly of
glands, etc. Make sure the unit is mounted securely. Make sure that the gaskets and
sealing materials have not deteriorated to the point that they are no longer suitable
in order to prevent development within flammable atmospheres. Replacement parts
must conform to the manufacturer’s specifications.
NOTE: The use of silicone sealant can inhibit the effectiveness of some types of
equipment for the leak detection. Intrinsically safe components do not need to be
isolated before working on them.
3. REPAIR OF INHERENTLY UNSAFE COMPONENTS
Do not apply permanent inductive or capacitive loads to the circuit without ensuring
that it does not exceed the voltage and current allowed for the equipment in use.
The components
Intrinsically safe are the only types that can be used in the presence of a flammable
GB
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innoliving INN-521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-521 in the language / languages: English, Italian as an attachment in your email.

The manual is 3.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info