800597

Innoliving INN-521 Manual

28
Zoom out
Zoom in
Previous page
1/44
Next page
28
sources of ignition, including cigarette smoke, should be kept sufficiently far from
the place of installation, repair, removal and disposal, during which flammable
refrigerant can be released into the surrounding space. Before starting work,
the area around the equipment should be inspected to ensure that there are no
flammable hazards or ignition hazards. No smoking signs must be put up.
7) Ventilation of the area
Make sure the work area is outdoors or is adequately ventilated before putting hands
to the system or conduct hot work. It is necessary to ensure adequate ventilation
during the period of execution of the work. Ventilation should disperse safely any
refrigerant released and preferably expel it externally to the atmosphere.
8) Controls for refrigeration equipment
When replacing electrical components, they must be fit for purpose and with the
correct specifications. The manufacturer’s maintenance and service guidelines
must be followed at all times. If in doubt, consult the technical assistance of a
qualified center. The following controls must be applied to systems using flammable
refrigerants: the size of the charge conforms to the size of the room where the
parts containing refrigerant are installed; machines and ventilation openings are
functioning properly and are not blocked; if an indirect refrigerant circuit is used,
the secondary circuit must be checked to verify the presence of refrigerant; the
marking on the equipment continues to be visible and legible. Illegible markings
and signs must be corrected; refrigeration pipe or components are installed in a
position where it is unlikely that they will be exposed to any substance that can
corrode components containing refrigerant, unless the latter are constructed with
materials that are intrinsically resistant to being corroded or adequately protected.
9) Control of electrical devices
Repair and maintenance of electrical components must include initial safety checks
and component inspection procedures. If there is a fault that could compromise
safety, do not connect any electrical power to the circuit until it is satisfactorily
addressed. If the fault cannot be corrected immediately but it is necessary to continue
GB
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Innoliving INN-521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Innoliving INN-521 in the language / languages: English, Italian as an attachment in your email.

The manual is 3.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info