615947
12
Zoom out
Zoom in
Previous page
1/25
Next page
FiberTEK III Document 164802 Iss 3
User Manual Page 12
Tx LC Adaptor (optional)
Fig. 2 Fiber Adapters
LC adapters are available optionally. The correct LC adapter must be used on the Tx Port - MM (Orange
boot- part number 025202) / SM (Yellow boot - part number 025201). When using LC adapters, the
adapter ring must first be removed from the Rx Port.
To remove an adapter, unscrew it anticlockwise.
Before fitting the new adapter, clean the inside of the ferrules in the port connector and in the adapter
with a cotton bud.
Fit the new adapter by screwing it clockwise.
2.3 Encircled Flux
By using the optional IDEAL 164050 (50/125 um SC to SC) or 164051 (50/125 um SC to LC)
conditioning unit, the Tx signal from the Multimode module can be made to be Encircled Flux compliant
as defined by IEC 62180-4-1 / TIA 455-526-14-B.
NOTE
The use of this conditioning unit introduces some Insertion Loss and therefore, before it is used, a Field
Calibration must be performed, with the conditioning unit connected to the adaptor Tx port.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks FiberTEK III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks FiberTEK III in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info