615947

Ideal Networks FiberTEK III Manual

11
Zoom out
Zoom in
Previous page
1/25
Next page
FiberTEK III Document 164802 Iss 3
User Manual Page 11
FiberTEK™ III adaptor and communications between
adaptor(s) established
Note: This LED is useful for identifying which fiber is
which in a duplex cable. It is not necessary to plug the
fiber into the Rx Port to do this - bringing the fiber end
near to the Rx Port is sufficient.
4
Protective caps
Always keep in place when the ports are not in use to
protect against damage and dust.
5
System connector
Connection to LanTEK III
6
Red light source
Visible source for cable identification.
2.5mm universal ferrule.
7
Tx Port
Dual Wavelength Light Source.
Note that the Tx signal is switched on by the system
software and cannot be switched off by the user.
Do not look directly into the fiber end - it may be
carrying a dangerous level of invisible light!
8
Visible Red light source status LED
Dark: Off
Red: On
9
Tx Status LED
Dark: light source OFF
Orange: 850 nm (MM) or 1550 nm (SM) source on
Red: 1300 nm (MM) or 1310 nm (SM) source on
10
Visible Red light source switch
Press once: Visible light source blinks
Press again: Visible light source On
Press again: Visible light source Off
Note: This function can be used to trace fibers by
looking for the visible red light coming out of the end
of a fiber or escaping from the jacket at a bend point.
Do not look directly into the fiber end - it may be
carrying a dangerous level of invisible light!
2.2 Fiber Adapters
FiberTEK™ III modules are provided with interchangeable FC, SC and ST fiber adapters. Adapters for
the Rx port and the Tx port are identical and interchangeable. All of the adapters have a screw fitting to
attach them to the module. The Rx port is fitted with an adapter ring that should be kept in place when
using FC, SC or ST adapters.
FC Adapter (supplied)
SC Adapter (supplied)
ST Adapter (supplied)
Rx LC Adapter (optional)
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ideal Networks FiberTEK III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ideal Networks FiberTEK III in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info