654662

Icon Image 6.0 EX - IMEVEX4715.0 Manual

11
Zoom out
Zoom in
Previous page
1/14
Next page
18 11
HOW T
O USE THE MANUAL MODE
Begin pedaling to activate the console.
The exercise cycle requires no batteries or
external power source. Power is supplied by
a generator as you pedal. To activate the con-
sole, begin pedaling at a speed of about 5 kilo
-
meters per hour (3 miles per hour) or faster.
After a few seconds, the console displays will
light. A tone will then sound and the console will
be ready for use.
Select the manual mode.
When the power is
turned on, the
manual mode will
be selected. If you
have selected a
program or the
iFIT.com mode,
reselect the manual mode by pressing the
Program Select button repeatedly until a track
appears in the matrix.
Begin pedaling and change the resistance of
the pedals as desired.
As you pedal,
change the resis-
tance of the ped-
als by pressing
the Resistance
buttons. There are
ten resistance lev-
els. Note: After the buttons are pressed, it will
take a moment for the pedals to reach the select-
ed resistance level.
Monitor your progress with the matrix, the
Intensity Level bar, and the two displays.
The matrix
—
When the manual
mode or the
iFIT.com mode is
selected, the
matrix will show a
track that represents 400 meters (1/4 mile). As
you exercise, the indicators around the track will
light in succession until the entire track is lit.
The
track will then darken and the indicators will
again begin to light in succession.
The Intensity
Level bar—The
Intensity Level bar
will indicate the
approximate inten-
sity level of your
exercise. Note:
During programs, the Intensity Level bar will also
prompt you to increase or decrease your pace.
The left display—
The left display will
show the elapsed
time, the resistance
level of the pedals,
your pedaling
speed, and the dis-
tance you have pedaled. The display will change
from one number to the next every few seconds,
as shown by the indicators around the display.
Note: Each time the resistance of the pedals
changes, the display will show the resistance
level. When a program is selected, the display will
show the time remaining in the program instead of
the elapsed time.
The right
display—The right
display will show
your power output
in watts, your ped-
aling pace in revo-
lutions per minute
(RPM), and the approximate number of calories
you have burned.
The display will change from
one number to the next every few seconds, as
shown by the indicators around the display
.
The
display will also show your heart rate when you
use the handgrip pulse sensor or the optional
chest pulse sensor
.
4
3
2
1
Matrix
HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the adaptor. Plug the adaptor into
the LINE OUT jack on your stereo.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the adaptor. Plug the adaptor into
an RCA Y-adaptor (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the
wire into the unused side of the Y-adaptor. Plug the
Y-adaptor into the LINE OUT jack on your stereo.
HOW TO CONNECT YOUR COMPUTER
Note:
If your computer has a 3.5mm LINE OUT
jack, see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the audio
cable into the LINE OUT jack on your computer.
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the splitter. Plug the splitter into the
PHONES jack on your computer. Plug your head-
phones or speakers into the other side of the splitter.
LINE OUT
Audio
Cable
A
PHONES
B
Audio Cable
Splitter
Headphones/Speakers
CD
VCR
Amp
LINE OUT
LINE OUT
Audio Cable
A
CD
VCR
Amp
LINE OUT
B
Adaptor
Audio
Cable
RCA
Y-adaptor
Wire removed from
LINE OUT
jack
Adaptor
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icon Image 6.0 EX - IMEVEX4715.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icon Image 6.0 EX - IMEVEX4715.0 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Icon Image 6.0 EX - IMEVEX4715.0

Icon Image 6.0 EX - IMEVEX4715.0 User Manual - German - 14 pages

Icon Image 6.0 EX - IMEVEX4715.0 User Manual - Dutch - 14 pages

Icon Image 6.0 EX - IMEVEX4715.0 User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info