670150
253
Zoom out
Zoom in
Previous page
1/282
Next page
18-5
D Command table (continued)
18
CONTROL COMMAND
Cmd. Sub Cmd. Data Description
1A
05 0023 0000 to
0255
Send/read CW side tone gain
(0000=0% to 0255=100%)
0024 00 or 01 Send/read CW side tone gain limit
(00=OFF, 01=ON)
0025 00 to 06 Send/read audio output level at APF ON
(00=0 dB, 06=+6 dB)
0026 0000 to
0255
Send/read beep gain
(0000=min. to 0255=max.)
0027 00 or 01 Send/read beep gain limit (00=OFF, 01=ON)
0028 00 to 30 Send/read headphones output ratio for the
volume level (00=–15 dB to 30=+15 dB)
0029 00 or 01 Send/read headphone output selection
(00=separated, 01=mixed)
0030 00 or 01 Send/read AF/SQL signal output to ACC-A
(00=MAIN; 01=SUB)
0031 00 or 01 Send/read AF/SQL signal output to ACC-B
(00=MAIN; 01=SUB)
0032 00 or 01 Send/read AF/IF signal output to ACC-A
(00=AF; 01=IF)
0033 00 or 01 Send/read the band selection for AF/IF signal
output to ACC-A (While holding down [XFC]
during split frequency operation)
(00=Main band, 01=Sub band)
0034 0000 to
0255
Send/read AF output level to ACC-A
(0000=0% to 0255=100%)
0035 00 or 01 Send/read squelch function for the AF signal
output to ACC-A
(00=OFF (Open), 01=ON)
0036 00 or 01 Send/read voice synthesizer and beep output
setting to ACC-A (when audio output is set)
(00=OFF, 01=ON)
0037 0000 to
0255
Send/read IF signal output level to ACC-A
(0000=0%, 0255=100%)
0038 00 or 01 Send/read AF/IF signal output to ACC-B
(00=AF; 01=IF)
0039 00 or 01 Send/read the band selection for AF/IF signal
output to ACC-B (While holding down [XFC]
during split frequency operation)
(00=Main band, 01=Sub band)
0040 0000 to
0255
Send/read AF output level to ACC-B
(0000=0% to 0255=100%)
0041 00 or 01 Send/read squelch function for the AF signal
output to ACC-B
(00=OFF (Open), 01=ON)
0042 00 or 01 Send/read voice synthesizer and beep output
setting to ACC-B (when audio output is set)
(00=OFF, 01=ON)
0043 0000 to
0255
Send/read IF signal output level to ACC-B
(0000=0%, 0255=100%)
0044 00 or 01 Send/read AF/IF signal output to S/P DIF
(00=AF, 01=IF)
0045 00 or 01 Send/read the band selection for AF/IF signal
output to S/P DIF (While holding down [XFC]
during split frequency operation)
(00=Main band, 01=Sub band)
0046 0000 to
0255
Send/read AF output level to S/P DIF
(0000=0% to 0255=100%)
0047 00 or 01 Send/read squelch function for the AF signal
output to S/P DIF
(00=OFF (Open), 01=ON)
0048 00 or 01 Send/read voice synthesizer and beep output
setting to S/P DIF (when audio output is set)
(00=OFF, 01=ON)
0049 0000 to
0255
Send/read IF signal output level to S/P DIF
(0000=0%, 0255=100%)
0050 00 or 01 Send/read AF/IF signal output to USB B
(00=AF, 01=IF)
0051 00 or 01 Send/read the band selection for AF/IF signal
output to USB B (While holding down [XFC]
during split frequency operation)
(00=Main band, 01=Sub band)
0052 0000 to
0255
Send/read AF output level to USB B
(0000=0% to 0255=100%)
Cmd. Sub Cmd. Data Description
1A
05 0053 00 or 01 Send/read squelch function for the AF signal
output to USB B
(00=OFF (Open), 01=ON)
0054 00 or 01 Send/read voice synthesizer and beep output
setting to USB B (when audio output is set)
(00=OFF, 01=ON)
0055 0000 to
0255
Send/read IF signal output level to USB B
(0000=0%, 0255=100%)
0056 00 or 01 Send/read AF/IF signal output to LAN
(00=AF, 01=IF)
0057 00 or 01 Send/read the band selection for AF/IF signal
output to LAN (While holding down [XFC]
during split frequency operation)
(00=Main band, 01=Sub band)
0058 0000 to
0255
Send/read MOD input level from ACC-A
(0000=0% to 0255=100%)
0059 0000 to
0255
Send/read MOD input level from ACC-B
(0000=0% to 0255=100%)
0060 0000 to
0255
Send/read MOD input level from S/P DIF
(0000=0% to 0255=100%)
0061 0000 to
0255
Send/read MOD input level from USB B
(0000=0% to 0255=100%)
0062 0000 to
0255
Send/read MOD input level from LAN
(0000=0% to 0255=100%)
0063 00 to 10 Send/read MOD input connector during
DATA OFF
( 00=MIC, 01=ACC-A, 02=ACC-B, 03=MIC/
ACC-A, 04=MIC/ACC-B, 05=ACC-A/ACC-
B, 06=MIC/ACCA/ACC-B, 07=S/P DIF,
08=USB, 09=LAN, 10=MIC/USB)
0064 00 to 10 Send/read MOD input connector during
DATA1
( 00=MIC, 01=ACC-A, 02=ACC-B, 03=MIC/
ACC-A, 04=MIC/ACC-B, 05=ACC-A/ACC-
B, 06=MIC/ACCA/ACC-B, 07=S/P DIF,
08=USB, 09=LAN, 10=MIC/USB)
0065 00 to 10 Send/read MOD input connector during
DATA2
( 00=MIC, 01=ACC-A, 02=ACC-B, 03=MIC/
ACC-A, 04=MIC/ACC-B, 05=ACC-A/ACC-
B, 06=MIC/ACCA/ACC-B, 07=S/P DIF,
08=USB, 09=LAN, 10=MIC/USB)
0066 00 to 10 Send/read MOD input connector during
DATA3
( 00=MIC, 01=ACC-A, 02=ACC-B, 03=MIC/
ACC-A, 04=MIC/ACC-B, 05=ACC-A/ACC-
B, 06=MIC/ACCA/ACC-B, 07=S/P DIF,
08=USB, 09=LAN, 10=MIC/USB)
0067 00 to 02 Send/read the band selection for operating
frequency band signal output to ACC-A
(00=MAIN, 01=SUB, 02=TX)
0068 00 to 02 Send/read the band selection for operating
frequency band signal output to ACC-B
(00=MAIN, 01=SUB, 02=TX)
0069 00 or 01 Send/read relay type selection
(00=Reed, 01=MOS-FET)
0070 00 to 07 Send/read the Main band’s external meter
output selection
( 00=Auto, 01=S (Main), 02=Po, 03=SWR,
04=ALC, 05=COMP, 06=VD, 07=ID)
0071 00 to 07 Send/read the Sub band’s external meter
output selection
( 00=Auto, 01=S (Sub), 02=Po, 03=SWR,
04=ALC, 05=COMP, 06=VD, 07=ID)
0072 0000 to
0255
Send/read the Main band’s external meter
output level (0000=0% to 0255=100%)
0073 0000 to
0255
Send/read the Sub band’s external meter
output level (0000=0% to 0255=100%)
0074 00 to 02 Send/read reference signal in/out setting
(00=IN, 01=OFF, 02=OUT)
0075 0000 to
0255
Send/read reference signal frequency setting
(0000=0% to 0255=100%)
0076 0000 to
0255
Send/read LCD unit backlight brightness
(0000=0% to 0255=100%)
0077 0000 to
0255
Send/read switch indicator brightness
(0000=1 to 0255=100)
Send/read data
253


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC7850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC7850 in the language / languages: English as an attachment in your email.

The manual is 15,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info