670150
255
Zoom out
Zoom in
Previous page
1/282
Next page
18-7
D Command table (continued)
18
CONTROL COMMAND
Cmd. Sub Cmd. Data Description
1A
05 0147 00 or 01 Send/read the memory keyer transmission
set for [F1] to [F8] on the keyboard
(00=OFF, 01=ON)
0148 00 or 01 Send/read external keypad set for voice
memory (00=OFF, 01=ON)
0149 00 or 01 Send/read external keypad set for memory
keyer (00=OFF, 01=ON)
0150 00 or 01 Send/read screen capture by the [POWER]
switch (00=OFF, 01=ON)
0151 00 or 01 Send/read screen capture by the [Print
Screen] key on the keyboard
(00=OFF, 01=ON)
0152 00 or 01 Send/read captured screen image data
saving memory device
(00=SD card, 01=USB flash drive)
0153 00 or 01 Send/read screen capture image data saving
format (00=PNG format, 01=BMP format)
0154 00 or 01 Send/read the Shutdown function
(00=Shutdown, 01=Standby/Shutdown)
0155 00 or 01 Send/read CI-V transceive set
(00=OFF, 01=ON)
0156 0000 to
0223
Send/read the transceive CI-V Address for
LAN to REMOTE in hexadecimal code
(0000=00h to 0223=DFh)
0157 00 or 01 Send/read antenna controller status
(frequency, and so on) data output from
[REMOTE] (00=OFF, 01=ON)
0158 00 or 01 Send/read echo back setting for CI-V
operation (00=ON, 01=OFF)
0159 00 to 03 Send/read data transfer speed for RTTY or
PSK decode output from USB B
( 00=4800 bps, 01=9600 bps, 02=19200 bps,
03=38400 bps)
0160 00 to 04 Send/read transmission control line setting
for USB B
( 00=OFF, 01=USB1 DTR, 02=USB1 RTS,
03=USB2 DTR, 04=USB2 RTS)
* Different line must be set from both CW
keying and RTTY (FSK)
0161 00 to 04 Send/read CW keying line setting for USB B
( 00=OFF, 01=USB1 DTR, 02=USB1 RTS,
03=USB2 DTR, 04=USB2 RTS)
* Different line must be set from both
transmission control and RTTY (FSK)
0162 00 to 04
Send/read RTTY (FSK) line setting for USB B
( 00=OFF, 01=USB1 DTR, 02=USB1 RTS,
03=USB2 DTR, 04=USB2 RTS)
* Different line must be set from both CW
keying and transmission control
0163 00 to 10 Send/read keyboard type
( 00=English, 01=Japanese,
02=United Kingdom, 03=French, 04=French
(Canadian), 05=German, 06=Portuguese,
07=Portuguese (Brazilian), 08=Spanish,
09=Spanish (Latin American), 10=Italian)
0164 0010 to
0100
Send/read keyboard repeat delay
( 0010=100 msec., 0100=1000 msec.
; 50 msec. steps)
0165 00 to 31 Send/read keyboard repeat rate
(00=2.0 cps to 31=30.0 cps)
0166 00 to 02 Send/read mouse pointer speed
(00=Slow, 01=Mid, 02=Fast)
0167 00 or 01 Send/read mouse pointer speed acceleration
(00=OFF, 01=ON)
0168 00 or 01 Send/read DHCP client setting (auto IP
address setting using DHCP server)
(00=OFF, 01=ON)
0169 Send/read IP address setting (fixed setting)
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254))
*Usable when the DHCP client setting is OFF
Cmd. Sub Cmd. Data Description
1A
05 0170 Read the IP address set by the DHCP server
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254))
* If the DHCP client setting is OFF, sends
back the manually set IP address (fixed IP
address)
0171 01 to 30 Send/read subnet mask
(01=128.0.0.0 to 30=255.255.255.252)
0172 Send/read default gateway
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254),
FF=Blank)
*Usable when the DHCP client setting is OFF
0173 Send/read primary DNS (Domain Name
System) server address
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254),
FF=Blank)
*Usable when the DHCP client setting is OFF
0174 Send/read secondly DNS (Domain Name
System) server address
( 0000000000000001 (0.0.0.1) to
0255025502550254 (255.255.255.254),
FF=Blank)
*Usable when the DHCP client setting is OFF
0175 see p. 18-12 Send/read network name when remotely
operating using the optional RS-BA1
(up to 15-character)
0176 00 or 01 Send/read the remote control setting
(00=OFF, 01=ON)
0177 000001 to
065535
Send/read the control port setting by
accessing from internet
(000001=1 to 065535=65535)
0178 000001 to
065535
Send/read the serial port setting by
accessing from internet
(000001=1 to 065535=65535)
0179 000001 to
065535
Send/read the audio port setting by
accessing from internet
(000001=1 to 065535=65535)
0180 00 or 01 Send/read the internet access line setting
( 00=FTTH (Fiber To The Home),
01=ADSL/CATV)
0181 see p. 18-12 Send/read Network radio name
(up to 16-character)
0182 00 or 01 Send/read scope indication during TX
(00=OFF, 01=ON)
0183 00 to 02 Send/read scope max. hold
(00=OFF, 01=ON)
0184 00 to 02 Send/read scope center frequency set
( 00=Filter center, 01=Carrier point center,
02=Carrier point center (Abs. Freq.))
0185 00 or 01 Send/read scope marker position setting
during fix type scope
(00=Filter center, 01 Carrier point)
0186 00 or 01 Send/read external monitor signal width
(00=Narrow, 01=Wide)
0187 00 to 03 Send/read averaging function for spectrum
scope
( 00=OFF,
01=Averaging the two observations,
02=Averaging the three observations,
03=Averaging the four observations)
0188 00 or 01 Send/read spectrum display type
(00=Fill, 01=Fill+Line)
0189 see p. 18-12 Send/read spectrum fill color
0190 see p. 18-12 Send/read spectrum line color
0191 see p. 18-12 Send/read spectrum color for peak hold
0192 00 or 01 Send/read waterfall set for spectrum scope
(00=OFF, 01=ON)
0193 00 to 02 Send/read waterfall speed
(00=Slow, 01=Mid, 02=Fast)
0194 00 to 02 Send/read waterfall height when expanded
scope is selected
(00=Small, 01=Mid, 02=Larger)
Send/read data
255


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC7850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC7850 in the language / languages: English as an attachment in your email.

The manual is 15,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info