670150
254
Zoom out
Zoom in
Previous page
1/282
Next page
18-6
D Command table (continued)
18
CONTROL COMMAND
Cmd. Sub Cmd. Data Description
1A
05 0078 00 to 02 Send/read screen image type
( 00=A, 01=B,
02=50th Anniversary for only IC-7850)
0079 00 to 08 Send/read frequency readout font
( 00=Basic (1), 01=Basic (2), 02=Basic (3),
03=Italic (1), 04=Italic (2), 05=Italic (3),
06=Round (1), 07=Round (2),
08=Round (3))
0080 00 to 02 Send/Read response speed for Standard
and Edgewise meter needle
(00=Slow, 01=Mid, 02=Fast)
0081 00 to 02 Send/read meter type
(00=Standard, 01=Edgewise, 02=Bar)
0082 00 or 01 Send/read meter type during expanded
screen (00=Edgewise, 01=Bar)
0083 00 or 01 Send/read peak hold set for Bar meter
(00=OFF, 01=ON)
0084 00 or 01 Send/read memory name indication setting
(00=OFF, 01=ON)
0085 00 or 01 Send/read audio peak filter width popup
indication setting (00=OFF, 01=ON)
0086 00 or 01 Send/read manual notch width pop-up
indication setting (00=OFF, 01=ON)
0087 00 to 03 Send/read screen saver function
( 00=OFF, 01=15 minutes, 02=30 minutes,
03=60 minutes)
0088 00 to 03 Send/read screen saver type
( 00=Bounce, 01=Rotation, 02=Twist,
03=Sleep)
0089 00 or 01 Send/read output signal setting for external
display (00=OFF, 01=ON)
0090 00 or 01 Send/read flame rate shift setting for external
display (00=OFF, 01=ON)
0091 00 or 01 Send/read image resolution for external
display (00=800x480, 01=800x600)
0092 00 or 01 Send/read synchronous pulse level setting
(00=L, 01=H)
0093 00 or 01 Send/read opening message indication
(00=OFF, 01=ON)
0094 see p. 18-12 Send/read opening message contents
(up to 10-character)
0095 20000101 to
20991231
Send/read date
( 20000101=1st Jan. 2000 to
20991231=31st Dec. 2099)
0096 0000 to
2359
Send/read time (0000=00:00 to 2359=23:59)
0097 00 or 01 Send/read NTP (Network Time Protocol)
function setting (00=OFF, 01=ON)
0098 see p. 18-12 Send/read NTP server address setting
0099 see p. 18-11 Send/read UTC offset time
0100 00 or 01 Send/read CLOCK2 function
(00=OFF, 01=ON)
0101 see p. 18-11 Send/read UTC offset time for CLOCK2
0102 see p. 18-12 Send/read CLOCK2 name
(up to 3-character)
0103 00 or 01 Send/read calibration marker
(00=OFF, 01=ON)
0104 00 or 01 Send/read confirmation beep
(00=OFF, 01=ON)
0105 00 Send/read the band edge beep OFF
01 Send/read the band edge beep ON (Beep
sounds with a default amateur band)
02 Send/read the band edge beep with user
setting ON
03 Send/read the band edge beep with user
setting/TX limit ON
0106 0050 to
0200
Send/read the Main band’s beep audio
frequency (0050=500 Hz to 0200=2000 Hz)
0107 0050 to
0200
Send/read the Sub band’s beep audio
frequency
(0050=500 Hz to 0200=2000 Hz)
0108 00 or 01 Send/read TX output power limit function
(00=OFF, 01=ON)
Cmd. Sub Cmd. Data Description
1A
05 0109 00 to 05 Send/read the TX Delay setting (HF)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0110 00 to 05 Send/read the TX Delay setting (50 MHz)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0111 00 to 05 Send/read TOT setting for remote or the
[TRANSMIT] key operation
( 00=OFF, 01=3 minutes, 02=5 minutes,
03=10 minutes, 04=20 minutes,
05=30 minutes)
0112 00 or 01 Send/read quick dualwatch function
(00=OFF, 01=ON)
0113 00 or 01 Send/read quick split set (00=OFF, 01=ON)
0114 see p. 18-12 Send/read FM split offset –9.999 to
+9.999 MHz for HF
0115 see p. 18-12 Send/read FM split offset –9.999 to
+9.999 MHz for 50 MHz
0116 00 or 01 Send/read split lock set (00=OFF, 01=ON)
0117 00 or 01 Send/read tuner auto start set
(00=OFF, 01=ON)
0118 00 or 01 Send/read PTT tune set (00=OFF, 01=ON)
0119 00 or 01 Send/read transverter set (00=OFF, 01=ON)
0120 see p. 18-12 Send/read transverter offset
0121 00 to 02 Send/read RTTY mark frequency
(00=1275 Hz, 01=1615 Hz, 02=2125 Hz)
0122 00 to 02 Send/read RTTY shift width
(00=170 Hz, 01=200 Hz, 02=425 Hz)
0123 00 or 01 Send/read RTTY keying polarity
(00=Normal, 01=Reverse)
0124 00 to 02 Send/read PSK tone frequency
(00=1000 Hz, 01=1500 Hz, 02=2000 Hz)
0125 00 or 01 Send/read speech language
(00=English, 01=Japanese)
0126 00 or 01 Send/read speech speed (00=Low, 01=High)
0127 00 or 01 Send/read S-level speech (00=OFF, 01=ON)
0128 00 or 01 Send/read speech with a mode switch
operation (00=OFF, 01=ON)
0129 00 or 01 Send/read memo pad numbers
(00=5 ch, 01=10 ch)
0130 00 or 01 Send/read [MAIN DIAL] function
(00=MAIN, 01=MAIN+SUB)
0131 00 to 02 Send/read [MAIN DIAL] auto TS
(00=OFF, 01=Low, 02=High)
0132 00 to 02 Send/read [SUB DIAL] auto TS
(00=OFF, 01=Low, 02=High)
0133 00 or 01 Send/read mic. up/down speed
(00=Low, 01=High)
0134 00 or 01 Send/read quick RIT/TX clear function
(00=OFF, 01=ON)
0135 00 to 02 Send/read SSB notch operation
(00=Auto, 01=Manual, 02=Auto/Manual)
0136 00 to 02 Send/read AM notch operation
(00=Auto, 01=Manual, 02=Auto/Manual)
0137 00 or 01 Send/read DIGI-SEL control function
(00=DIGI-SEL, 01=APF)
0138 00 or 01 Send/read band indication for Filter screen
(00=Fix, 01=Auto)
0139 00 or 01 Send/read SSB/CW synchronous tuning
function (00=OFF, 01=ON)
0140 00 or 01 Send/read CW normal side set
(00=LSB, 01=USB)
0141 00 or 01 Set/read APF type (00=SHARP, 01=SOFT)
0142 00 or 01 Send/read band setting for audio output from
mic. connector (00=MAIN+SUB, 01=SUB)
0143 00 or 01 Send/read bias voltage output for mic. audio
input ([MIC]; pin 1) (00=OFF, 01=ON)
0144 00 or 01 Send/read external keypad set for RTTY
memory (00=OFF, 01=ON)
0145 00 or 01 Send/read external keypad set for PSK
memory (00=OFF, 01=ON)
0146 00 or 01 Send/read the voice memory transmission
set for [F1] to [F8] on the keyboard
(00=OFF, 01=ON)
Send/read data
254


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC7850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC7850 in the language / languages: English as an attachment in your email.

The manual is 15,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info