670163

Icom IC-7300 Manual

159
Zoom out
Zoom in
Previous page
1/173
Next page
19
CONTROL COMMAND
19-6
Remote control (CI-V) information (Continued)
Cmd. Sub cmd. Data Description
1A* 05 0129 p. 19-8 Send/read scope edge 3 frequencies for
11.00 to 15.00 MHz band
0130 p. 19-8 Send/read scope edge 1 frequencies for
15.00 to 20.00 MHz band
0131 p. 19-8 Send/read scope edge 2 frequencies for
15.00 to 20.00 MHz band
0132 p. 19-8 Send/read scope edge 3 frequencies for
15.00 to 20.00 MHz band
0133 p. 19-8 Send/read scope edge 1 frequencies for
20.00 to 22.00 MHz band
0134 p. 19-8 Send/read scope edge 2 frequencies for
20.00 to 22.00 MHz band
0135 p. 19-8 Send/read scope edge 3 frequencies for
20.00 to 22.00 MHz band
0136 p. 19-8 Send/read scope edge 1 frequencies for
22.00 to 26.00 MHz band
0137 p. 19-8 Send/read scope edge 2 frequencies for
22.00 to 26.00 MHz band
0138 p. 19-8 Send/read scope edge 3 frequencies for
22.00 to 26.00 MHz band
0139 p. 19-8 Send/read scope edge 1 frequencies for
26.00 to 30.00 MHz band
0140 p. 19-8 Send/read scope edge 2 frequencies for
26.00 to 30.00 MHz band
0141 p. 19-8 Send/read scope edge 3 frequencies for
26.00 to 30.00 MHz band
0142 p. 19-8 Send/read scope edge 1 frequencies for
30.00 to 45.00 MHz band
0143 p. 19-8 Send/read scope edge 2 frequencies for
30.00 to 45.00 MHz band
0144 p. 19-8 Send/read scope edge 2 frequencies for
30.00 to 45.00 MHz band
0145 p. 19-8 Send/read scope edge 1 frequencies for
45.00 to 60.00 MHz band
0146 p. 19-8 Send/read scope edge 2 frequencies for
45.00 to 60.00 MHz band
0147 p. 19-8 Send/read scope edge 3 frequencies for
45.00 to 60.00 MHz band
0148 p. 19-8 Send/read scope edge 1 frequencies for
60.00 to 74.80 MHz band
0149 p. 19-8 Send/read scope edge 2 frequencies for
60.00 to 74.80 MHz band
0150 p. 19-8 Send/read scope edge 3 frequencies for
60.00 to 74.80 MHz band
0151 00/01 Send/read audio FFT scope display type
(00=Fill, 01=Fill+Line)
0152 p. 19-8 Send/read the Audio FFT scope waveform
color
0153 00/01 Send/read the Audio FFT scope waterfall
display (00=OFF, 01=ON)
0154 p. 19-8 Send/read the Audio Oscilloscope scope
waveform color
0155 00 Normal selection for contest number style
01
“190→ANO” selection for contest number style
02
“190→ANT” selection for contest number style
03 “90→NO” selection for contest number style
04 “90→NT” selection for contest number style
0156 01 to 08 Send/read count up trigger channel
( 01=M1, 02=M2, 03=M3, 04=M4, 05=M5,
06=M6, 07=M7, 08=M8)
0157 0001 to
9999
Send/read present number
(0001=1 to 9999=9999)
0158 0000 to
0255
Send/read CW side tone gain
(0000=0% to 0255=100%)
0159 00/01 Send/read CW side tone gain limit
(00=OFF, 01=ON)
0160 01 to 60 Send/read CW keyer repeat time
(01=1 sec. to 60=60 sec.)
0161 28 to 45 Send/read CW keyer dot/dash ratio
(28=1:1:2.8 to 45=1:1:4.5)
0162 00 to 03 Send/read rise time
( 00=2 msec., 01=4 msec., 02=6 msec.,
03=8 msec.)
Cmd. Sub cmd. Data Description
1A* 05 0163 00/01 Send/read paddle polarity
(00=Normal, 01=Reverse)
0164 00 to 02 Send/read keyer type
(00=Straight, 01=Bug, 02=Paddle)
0165 00/01 Send/read mic. up/down keyer set
(00=OFF, 01=ON)
0166 00 to 03 Send/read avaraging function for RTTY FFT
scope (00=OFF, 01=2, 02=3, 03=4)
0167 p. 19-8 Send/read RTTY FFT scope waveform color
0168 00/01 Send/read RTTY decode USOS
(00=OFF, 01=ON)
0169 00/01 Send/read RTTY decode new line code
(00=CR,LF,CR+LF, 01=CR+LF)
0170 00/01 Send/read RTTY TX USOS
(00=OFF, 01=ON)
0171 p. 19-8 Send/read received RTTY text font color
0172 p. 19-8 Send/read transmitted RTTY text font color
0173 00/01 Send/read RTTY log function
(00=OFF, 01=ON)
0174 00/01 Send/read le saving format for the
RTTY log (00=Text, 01=HTML)
0175 00/01 Send/read RTTY time stamp set
(00=OFF, 01=ON)
0176 00/01 Send/read RTTY Decode Log Time Stamp
(00=Local, 01=UTC)
0177 00/01 Send/read RTTY frequency stamp
(00=OFF, 01=ON)
0178 00/01 Send/read scan speed (00=Low, 01=High)
0179 00/01 Send/read scan resume (00=OFF, 01=ON)
0180 00/01 Send/read auto monitor function setting when
transmitting a recorded voice memory
(00=OFF, 01=ON)
0181 01/15 Send/read repeat interval to transmit recorded
voice audio
(01=1 sec. to 15=15 sec.)
0182 00/01 Send/read recording mode for QSO recorder
(00=TX&RX, 01=RX Only)
0183 00/01 Send/read recording TX audio for QSO
recorder
(00=Microphone audio, 01=TX monitor audio)
0184 00/01 Send/read squelch relation to recording
RX audio for QSO recorder
(00=Always, 01=Squelch Auto)
0185 00/01 Send/read QSO record le split function
setting (00=OFF, 01=ON)
0186 00/01 Send/read PTT Automatic Recording function
setting (00=OFF, 01=ON)
0187 00 to 03 Send/read RX audio recording status for PTT
Automatic Recording function
( 00=OFF (records no RX audio),
01=Records the RX audio just before 5 sec.,
02=Records the RX audio just before 10 sec.,
03=Records the RX audio just before 15 sec.)
0188 00 to 03 Send/read QSO PLAY Skip time
(00=3 sec., 01=5 sec., 02=10 sec., 03=30 sec.)
0189 00 to 09 Send/read NB depth (00=1 to 09=10)
0190 0000 to
0255
Send/read NB width (0000=1 to 0255=100)
0191 00 to 20 Send/read VOX delay
(00=0.0 sec. to 20=2.0 sec.)
0192 00 to 03 Send/read VOX voice delay
(00=OFF, 01=Short, 02=Mid., 03=Long)
0193 00/01 Send/read the MF band attenuator setting
(00=OFF, 01=ON)
06 p. 19-9 Send/read DATA mode setting
07 00/01 Send/read IP+ function setting
(00=OFF, 01=ON)
1B* 00 p. 19-11 Send/read repeater tone frequency
01 p. 19-11 Set/read TSQL tone frequency
D Command table (Continued)
… 159 …


Need help? Post your question in this forum.

Forumrules
1

Forum

icom-ic-7300

Reset search

  • is there available a wiring pictorial chart for the small internal ic-7300 coaxial jumper cables?
    ie: from the RF unit to the PA board? tnx Sam in Alabam KF4TXQ Submitted on 2-1-2022 at 06:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7300 in the language / languages: English as an attachment in your email.

The manual is 24,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info