670163

Icom IC-7300 Manual

157
Zoom out
Zoom in
Previous page
1/173
Next page
19
CONTROL COMMAND
19-4
Remote control (CI-V) information (Continued)
Cmd. Sub cmd. Data Description
50 00 to 01 Dial lock function *(00=OFF, 01=ON)
56 00 to 01 DSP lter type *(00=SHARP, 01=SOFT)
57 00 to 02 Manual notch width
(00=WIDE, 01=MID, 02=NAR)
58 00 to 02 SSB transmit bandwidth
(00=WIDE, 01=MID, 02=NAR)
17 p. 19-11 Send CW messages*
2
18 00 Turn OFF the transceiver
01 Turn ON the transceiver*
3
19 00 Read the transceiver ID
1A* 00 p. 19-10 Send/read memory contents
01 p. 19-9 Send/read band stacking register contents
02 p. 19-10 Send/read memory keyer contents*
1
03 00 to 49 Send/read the selected lter width
( AM: 00=200 Hz to 49=10 kHz; other than AM
modes: 00=50 Hz to 31/40=2700 Hz/3600
Hz)
04 00 to 13 Send/read the selected AGC time constant
*( 00=OFF, AM: 01=0.3 sec. to 13=8.0 sec.,
SSB,CW,RTTY:01=0.1 sec. to 13=6.0 sec.)
05 0001 p. 19-8 Send/read SSB RX HPF/LPF settings
0002 00 to 10 Send/read SSB RX Tone (Bass) level
(00=–5 to 10=+5)
0003 00 to 10 Send/read SSB RX Tone (Treble) level
(00=–5 to 10=+5)
0004 p. 19-8 Send/read AM RX HPF/LPF settings
0005 00 to 10 Send/read AM RX Tone (Bass) level
(00=–5 to 10=+5)
0006 00 to 10 Send/read AM RX Tone (Treble) level
(00=–5 to 10=+5)
0007 p. 19-8 Send/read FM RX HPF/LPF settings
0008 00 to 10 Send/read FM RX Tone (Bass) level
(00=–5 to 10=+5)
0009 00 to 10 Send/read FM RX Tone (Treble) level
(00=–5 to 10=+5)
0010 p. 19-8 Send/read CW RX HPF/LPF settings
0011 p. 19-8 Send/read RTTY RX HPF/LPF settings
0012 00 to 10 Send/read SSB TX Tone (Bass) level
(00=–5 to 10=+5)
0013 00 to 10 Send/read SSB TX Tone (Treble) level
(00=–5 to 10=+5)
0014 p. 19-8 Send/read SSB TX bandwidth for wide
0015 p. 19-8 Send/read SSB TX bandwidth for mid
0016 p. 19-8 Send/read SSB TX bandwidth for narrow
0017 00 to 10 Send/read AM TX Tone (Bass) level
(00=–5 to 10=+5)
0018 00 to 10 Send/read AM TX Tone (Treble) level
(00=–5 to 10=+5)
0019 00 to 10 Send/read FM TX Tone (Bass) level
(00=–5 to 10=+5)
0020 00 to 10 Send/read FM TX Tone (Treble) level
(00=–5 to 10=+5)
0021 0000 to
0255
Send/read beep gain
(0000=min. to 0255=max.)
0022 00/01 Send/read beep gain limit *(00=OFF, 01=ON)
0023 00/01 Send/read conrmation beep
(00=OFF, 01=ON)
0024 00 Send/read the band edge beep OFF
01 Send/read the band edge beep ON
(Beep sounds with a default amateur band)
02 Send/read the band edge beep with user
setting ON
03 Send/read the band edge beep with user
setting/TX limit ON
0025 00 to 02 Send/read the RF/SQL Control setting
(00=Auto, 01=SQL, 02=RF+SQL)
0026 00 to 05 Send/read the TX Delay setting (HF)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0027 00 to 05 Send/read the TX Delay setting (50 MHz)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
Cmd. Sub cmd. Data Description
1A* 05 0028 00 to 05 Send/read the TX Delay setting (70 MHz)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0029 00 to 05 Send/read the Time-Out Timer setting
( 00=OFF, 01=3 min., 02=5 min., 03=10min.,
04=20 min., 05=30 min.)
0030 00/01 Send/read quick split set *(00=OFF, 01=ON)
0031 p. 19-9 Send/read FM split offset –9.999 to +9.999
MHz for HF
0032 p. 19-9 Send/read FM split offset –9.999 to +9.999
MHz for 50 MHz
0033 00/01 Send/read split lock set *(00=OFF, 01=ON)
0034 00/01 Send/read [TUNER] Switch set
(00=Manual, 01=Auto)
0035 00 or 01 Send/read PTT tune set *(00=OFF, 01=ON)
0036 00 to 02 Send/read RTTY mark frequency
(00=1275 Hz, 01=1615 Hz, 02=2125 Hz)
0037 00 to 02 Send/read RTTY shift width
(00=170 Hz, 01=200 Hz, 02=425 Hz)
0038 00/01 Send/read RTTY keying polarity
(00=Normal, 01=Reverse)
0039 00/01 Send/read speech language
(00=English, 01=Japanese)
0040 00/01 Send/read speech speed (00=Low, 01=High)
0041 00/01 Send/read S-level speech (00=OFF, 01=ON)
0042 00/01 Send/read speech with a mode switch
operation (00=OFF, 01=ON)
0043 0000 to
0255
Send/read speech level
(0000=0% to 0255=100%)
0044 00/01 Send/read [SPEECH/LOCK] key function
setting
( 00=Push: SPEECH, Hold down: LOCK,
01=Push: LOCK, Hold down: SPEECH)
0045 00/01 Send/read the Lock function setting
(00=MAIN DIAL, 01=PANEL)
0046 00/01 Send/read memo pad numbers
(00=5 ch, 01=10 ch)
0047 00 to 02 Send/read main dial auto TS
(00=OFF, 01=Low, 02=High)
0048 00/01 Send/read mic. up/down speed
(00=Low, 01=High)
0049 00 or 01
Send/read quick RIT/∂TX clear function
(00=OFF, 01=ON)
0050 00 to 02 Send/read SSB notch operation
*(00=Auto, 01=Manual, 02=Auto/Manual)
0051 00 to 02 Send/read AM notch operation
(00=Auto, 01=Manual, 02=Auto/Manual)
0052 00/01 Send/read SSB/CW synchronous tuning
function (00=OFF, 01=ON)
0053 00/01 Send/read CW normal side set
(00=LSB, 01=USB)
0054 00/01 Send/read screen capture by the [POWER]
switch (00=OFF, 01=ON)
0055 00/01 Send/read screen capture image data saving
format (00=PNG format, 01=BMP format)
0056 00/01 Send/read keyboard type
(00=Ten-key, 01=Full Keyboard)
0057 00/01 Send/read calibration marker
(00=OFF, 01=ON)
0058 0000 to
0255
Send/read reference frequency
(0000=0%,0255=100%)
0059 00 or 01 Send/read AF/IF signal output to ACC/USB
(00=AF, 01=IF)
0060 0000 to
0255
Send/read AF output level to ACC/USB
(0000=0% to 0255=100%)
0061 00/01 Send/read squelch function for the AF signal
output to ACC/USB
(00=OFF (Open), 01=ON)
0062 00/01 Send/read beep and speech output setting to
ACC/USB (when AF signal output is set)
(00=OFF, 01=ON)
0063 0000 to
0255
Send/read IF signal output level to ACC/USB
(0000=0%, 0255=100%)
D Command table (Continued)
… 157 …


Need help? Post your question in this forum.

Forumrules
1

Forum

icom-ic-7300

Reset search

  • is there available a wiring pictorial chart for the small internal ic-7300 coaxial jumper cables?
    ie: from the RF unit to the PA board? tnx Sam in Alabam KF4TXQ Submitted on 2-1-2022 at 06:09

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7300 in the language / languages: English as an attachment in your email.

The manual is 24,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info