670164
95
Zoom out
Zoom in
Previous page
1/104
Next page
90
14
CONTROL COMMAND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Command Sub command Description
1A 0303 Set/read Key speed level setting
(0=6 wpm to 255=60 wpm)
0304 Set/read CW Pitch setting (0=300
Hz to 120=900 Hz; 5 Hz steps)
0305 Set/read CW side tone setting
(0=0% to 255=100%)
0306 Set/read CW side tone level limit
(0=OFF, 1=ON)
0307 Set/read Twin peak filter
(0=OFF, 1=ON)
0308 Set/read RTTY mark frequency
(0=1275 Hz, 1=1615 Hz, 2=2125 Hz)
0309 Set/read RTTY shift width
( 0=170 Hz, 1=200 Hz, 2=425 Hz,
3=850 Hz)
0310 Set/read RTTY keying polarity
(0=Normal, 1=Reverse)
0311 Set/read LCD brightness
(0=OFF, 1=Dark, 2=Bright)
0312 Set/read confirmation beep
(0=OFF, 1=ON)
0313 Set/read band edge beep
(0=OFF, 1=ON)
0314 Set/read beep gain
(0=0% to 255=100%)
0315 Set/read beep gain limit
(0=OFF, 1=ON)
0316 Set/read [RF/SQL] control set
(0=Auto, 1=SQL, 2=RF+SQL)
0317 Set/read meter peak hold
(0=OFF, 1=ON)
0318 Set/read quick split set
(0=OFF, 1=ON)
0319 Set/read split lock set
(0=OFF, 1=ON)
0320 Set/read transmit frequency monitor
with [RIT] key set
(0=OFF, 1=ON)
0321 Set/read tuner auto start set
(0=OFF, 1=ON)
0322 Set/read PTT tune start set
(0=OFF, 1=ON)
0323 Set/read MOD input connector
during DATA OFF
( 0=MIC, 1=ACC, 2=MIC+ACC,
3=USB)
0324 Set/read MOD input connector
during DATA ON
( 0=MIC, 1=ACC, 2=MIC+ACC,
3=USB)
0325 Set/read MOD input gain from USB
(0=0% to 255=100%)
0326 Set/read speech level
(0=0% to 255=100%)
0327 Set/read speech language
(0=English, 1=Japanese)
0328 Set/read speech speed
(0=Slow, 1=Fast)
0329 Set/read S-level speech
(0=OFF, 1=ON)
0330 Set/read speech capability with
[MODE] key operation
(0=OFF, 1=ON)
0331 Set/read scan speed set
(0=Slow, 1=Fast)
0332 Set/read scan resume set
(0=OFF, 1=ON)
Command Sub command Description
1A 0333 Set/read main dial auto TS (0=OFF,
1=Low, 2=High)
0334 Set/read 1/4 dial speed set (0=OFF,
1=ON)
0335 Set/read mic. UP/DOWN speed
(0=Low, 1=High)
0336 Set/read SSB/CW synchronous
tuning function (0=OFF, 1=ON)
0337 Set/read CW carrier point set
(0=LSB, 1=USB)
0338 Set/read break-in set (0=OFF,
1=semi BK-IN, 2=full BK-IN)
0339 Set/read break-in delay time set
(20=2.0 d to 130=13.0 d)
0340 Set/read CW keyer dot/dash ratio
(28=1:1:2.8 to 45=1:1:4.5)
0341 Set/read CW paddle polarity
(0=Normal, 1=Reverse)
0342 Set/read CW keyer type
( 0=Straight, 1=Bug-key, 2=ELEC
Key)
0343 Set/read MIC UP/DOWN keyer
(HM-36) set (0=OFF, 1=ON)
0344 Set/read SSB mode selectability
( 0=OFF: inhibition, 1=ON:
selectable)
0345 Set/read CW mode selectability
( 0=OFF: inhibition, 1=ON:
selectable)
0346 Set/read RTTY mode selectability
( 0=OFF: inhibition, 1=ON:
selectable)
0347 Set/read AM mode selectability
( 0=OFF: inhibition, 1=ON:
selectable)
0348 Set/read CI-V transceive set
(0=OFF, 1=ON)
0349 Set/read reference frequency set
(0=0% to 255=100%)
0350 Set/read noise blanker level set
(0=0% to 255=100%)
0351 Set/read noise blanker width set
(0=0% to 255=100%)
0352 Set/read NR level set
(0=0 to 15=15)
0353 Set/read VOX gain set
(0=0% to 255=100%)
0354 Set/read Anti-VOX gain set
(0=0%, 255=100%)
0355 Set/read VOX delay set
(0=0.0 sec. to 20=2.0 sec.)
0356 Set/read speech compressor level
(0=0 to 10=10)
04 Send/read DATA mode with filter set
(see next page for detail)
05 Set/read DSP filter shape
(0=Sharp, 1=Soft)
06 Set/read manual notch width
(0=Wide, 1=Mid., 2=Nar.)
1C
00 Set/read the transceiver's condition
(0=Rx, 1=Tx)
01 Set/read antenna tuner condition
( 0=OFF, 1=ON, 2=Start tuning or
while tuning)
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info