670164
94
Zoom out
Zoom in
Previous page
1/104
Next page
D Command table
Command Sub command Description
00 Send frequency data.
(for transceive operation)
01
00 Select LSB mode
(for transceive operation)
01 Select USB mode
(for transceive operation)
02 Select AM mode
(for transceive operation)
03 Select CW mode
(for transceive operation)
04 Select RTTY mode
(for transceive operation)
07 Select CW-R mode
(for transceive operation)
08 Select RTTY-R mode
(for transceive operation)
02
Read band edge frequencies
03 Read operating frequency
04 Read operating mode
05 Set operating frequency
06 00 Select LSB mode
01 Select USB mode
02 Select AM mode
03 Select CW mode
04 Select RTTY mode
07 Select CW-R mode
08 Select RTTY-R mode
07 Select VFO mode
00 Select VFO A
01 Select VFO B
A0 Equalize VFO A and VFO B
B0 Exchange VFO A and VFO B
08 Select memory mode
0001−0201*
Select memory channel
*P1=0200, P2=0201
09
Memory write
0A Memory to VFO
0B Memory clear
0E 00 Scan stop
01 Programmed/memory scan start
02 Programmed scan start
22 Memory scan start
D0 Set scan resume OFF
D3 Set scan resume ON
0F 00 Turn the split function OFF
01 Turn the split function ON
10 00 Select 10 Hz (or 1 Hz) tuning step
01 Select 100 Hz tuning step
02 Select 1 kHz tuning step
03 Select 5 kHz tuning step
04 Select 9 kHz tuning step
05 Select 10 kHz tuning step
11 Set/read attenuator.
(
0=OFF, 20=ON (20 dB))
13 00 Announce with voice synthesizer
01 ( 00=all data 01=frequency and
02 S-meter; 02=receive mode)
Command Sub command Description
14 01 [AF] level setting
(0=max. CCW to 255=max. CW)
02 [RF] level setting
(0=max. CCW to 255=11 o'clock)
03 [SQL] level setting
(0=11 o'clock to 255=max. CW)
06 NR level setting
(0=0% to 255=100%)
07 Inside [PBT] setting (0= max. CCW,
128=center, 255=max. CW)
08 Outside [PBT] setting (0= max.
CCW, 128=center, 255=max. CW)
09 CW Pitch setting (0=300 Hz to
255=900 Hz (5 Hz steps))
0A RF power setting
(0=minimum to 255=100%)
0B MIC gain setting
(0=0% to 255=100%)
0C Key speed level setting
(0=6 wpm to 255=60 wpm)
0D [MNF] setting (0=max. CCW,
128=center, 255=max. CW)
0E COMP level setting
(0=0 to 255=10)
0F Break-IN delay setting
(0=2.0 d to 255=13.0 d)
12 NB level setting
(0=0% to 255=100%)
16 VOX gain setting
(0=0% to 255=100%)
17 Anti VOX gain setting
(0=0% to 255=100%)
15 01 Read squelch condition
02 Read S-meter level
11 Read RF power meter
12 Read SWR meter
13 Read ALC meter
16 02 Preamp (0=OFF, 1=ON)
12 AGC selection
(0=OFF, 1=Fast, 2=Slow.)
22 Noise blanker (0=OFF, 1=ON)
40 Noise reduction (0=OFF, 1=ON)
41 Auto notch (0=OFF, 1=ON)
44 Speech compressor
(0=OFF, 1=ON)
46 VOX function (0=OFF, 1=ON)
47 Break-IN function (0=OFF, 1=semi
BK-IN, 2=full BK-IN)
48 Manual notch (0=OFF, 1=ON)
4F Twin peak filter (0=OFF, 1=ON)
50 Dial lock function (0=OFF, 1=ON)
19 00 Read the transceiver ID
1A 00 Set/read memory contents
An additional code, 00010201
(0200=P1, 0201=P2), must be added
to specify the memory channel.
01 Set/read band stacking register
contents (see p. 91 for details)
02 Set/read the selected filter width
( SSB, CW, RTTY: 0=50 Hz
to 40/31=3600/2700 Hz;
AM:
0=200 Hz to 39=8 kHz)
0301 Set/read RF power setting
(0=minimum to 255=100%)
0302 Set/read MIC gain setting
(0=0% to 255=100%)
89
14
CONTROL COMMAND
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info