670164
97
Zoom out
Zoom in
Previous page
1/104
Next page
15
92
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
General
• Frequency coverage :
Receive
30 kHz60.000000 MHz*
1
*
2
Transmit
1.800–1.999999 MHz*
2
, 3.5003.999999 MHz*
2
5.33050*
3
, 5.34650*
3
, 5.36650*
3
,
5.37150*
3
, 5.40350*
3
,
7.000–7.300 MHz*
2
, 10.100–10.150 MHz,
14.000–14.350 MHz,
18.068–18.168 MHz,
21.00021.450 MHz,
24.89024.990 MHz,
28.00029.700 MHz,
50.00054.000 MHz*
2
,
*
1
Some frequency bands are not guaranteed.
*
2
Depending on version. *
3
USA version only.
• Mode : SSB, CW, RTTY, AM
Number of memory CH
: 201 (split memory: 199; scan edges: 2)
channels
• Antenna connector : SO-239
• Antenna impedance : 50 ø (unbalanced)
Usable temperature : –10°C to +60°C (+14°F to +140°F)
range
• F
requency stability : Less than ±0.5 ppm
Power supply : 13.8 V DC±15% (negative ground)
requirement
Current drain : Transmit (at 100 W) 22 A
(at 13.8 V DC) Receive squelched 1.3 A
max. audio 2.0 A
Dimensions : 241(W)
× 84(H) × 281(D) mm,
(projections not included) 9
1
2(W) × 3
5
16(H) × 11
1
16(D) in
Weight (approx.) : 5.5 kg (12.1 lb)
• CI-V connector : 2-conductor 3.5 (d) mm (
1
8˝)
• ACC connector : 13-pin
Transmitter
• Output power
SSB, CW, RTTY : 2–100 W
AM : 1–25 W* (*Carrier power)
• Modulation system
SSB
: Digital PSN modulation
AM : Digital Low power modulation
Spurious emissions
HF bands : Less than
50 dB
50 MHz band
: Less than –63 dB
• Carr
ier suppression : More than 50 dB
• Unwanted sideband : More than 50 dB
Microphone : 8-pin connector (600
ø)
connector
KEY connector : 3-conductor 6.3 (d) mm (
1
4˝)
Receiver
• Receive system : Triple-conversion
superheterodyne
• Intermediate frequencies
1st
: 64.455 MHz
2nd
: 455 kHz
3rd
: 15.625 kHz
• Sensitivity (10dB S/N, preamp: ON, Filter shape: sharp)
SSB
, CW : Less than 0.16 µV
(1.8−29.7 MHz)
Less than 0.13 µV
(50 MHz band)
AM
: Less than 13 µV
(0.5−1.799 MHz)
Less than 2 µV
(1.8−29.7 MHz)
Less than 1 µV
(50 MHz band)
• Squelch sensitivity (SSB, threshold, preamp ON)
: Less than 5.6 µV
• Selectivity
SSB*
(BW=2.4 kHz) : More than 2.4 kHz/6 dB
Less than 3.6 kHz/60 dB
CW*
(BW=500 Hz) : More than 500 Hz/6 dB
Less than 900 Hz/60 dB
R
TTY
(BW=350 Hz) : More than 360 Hz/6 dB
Less than 650 Hz/60 dB
AM
(BW=6 kHz) : More than 6.0 kHz/6 dB
Less than 15.0 kHz/60 dB
*IF filter shape is set to SHARP.
• Spurious and image rejection ratio
: More than 70 dB
(except
1
2
IF through on 50 MHz band)
• Audio output power : More than 2.0 W at 10%
distortion with an 8 ø load
(at 13.8 V DC)
• RIT v
ariable range : ±9.999 kHz
• PHONES connector :
3-conductor 6.3 (d) mm (
1
4˝)/8 ø
• EXT SP connector : 2-conductor 3.5 (d) mm (
1
8˝)/8 ø
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7200 in the language / languages: English as an attachment in your email.

The manual is 10,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info