670168
9
Zoom out
Zoom in
Previous page
1/96
Next page
1
PANEL DESCRIPTION
1-5
!6 NOTCH KEY
NOTCH
(AI sec. 5)
(Mode = Auto notch: SSB/AM/FM
Manual notch: SSB/CW/RTTY/AM)
In the SSB and AM modes, push to toggle the
notch function between auto, manual and OFF.
  •EithertheAutoorManualnotchfunctioncanbeturned
OFF in
the “[NOTCH] Switch (SSB)/(AM)” items
of the
“Function” Set mode. (6-21)
SET
> Function > [NOTCH] Switch (SSB)
SET
> Function > [NOTCH] Switch (AM)
In the FM mode, push to turn the Auto Notch func-
tion ON or OFF.
In the CW or RTTY mode, push to turn the Manual
Notch function ON or OFF.
  •“MN” appears when the Manual Notch function is
ON.
  •“AN”appearswhentheAutoNotchfunctionisON.
  •NoindicatorappearswhenthenotchlterisOFF.
Hold down for 1 second to display the “NOTCH”
screen.
Push to return to the previous screen.
  •RotatetheDialtoadjustthenotchfrequencytoreject
an interfering signal when the manual function is ON.
  •Notchltercenterfrequency:
SSB/RTTY: –1040 Hz to +4040 Hz
CW: CW pitch frequency –2540 Hz to
CW pitch frequency +2540 Hz
AM: –5060 Hz to +5100 Hz
What is the notch filter?
The notch filter is a narrow filter that eliminates un-
wanted CW or AM carrier tones, while preserving
the desired voice signal. The DSP circuit automati-
cally adjusts the notch frequency to effectively elimi-
nate unwanted tones.
!7 DR MODE KEY
DR
(section 4, 5, AI sec. 9)
Push to select the DR mode.
•WhentheDRmodeisselected,thetransceiverauto-
matically selects the DV mode.
In the DR mode, push to cancel it.
•Thetransceiverreturnstothepreviousscreenbefore
entering the DR mode.
!8 SET MODE KEY
SET
(section 6)
Push to enter or exit the SET mode.
•“VoiceMemo,“CallSign,“RXHistory,“DVMemory,”
“MyStation,”“DVSet,”“GPS,”“SPEECH,”“QSO/RX
Log,” “Function,” “Tone Control, “Connectors, “Dis-
play,“Time Set, “SD Card” and Others” set group
are selectable.
!9 QUICK MENU KEY
QUICK
PushtoopenorclosetheQuickMenuwindow.
•The Quick Menuis used to quickly select various
functions.
In the setting screen, push to open the Default
set window.
  •Touch“Default”toresettothedefaultsetting.
@0 AUTO TUNE•RXCS KEY
AUTO TUNE
RX
CS
AUTO TUNE KEY Operation (AI sec. 4)
(Mode: CW)
 Push to automatically adjust for a zero beat
with the received signal.
Zero beat means that two signals are exactly the
same frequency.
  •“AUTOTUNE”blinkswhentheautotunefunction
is activated.
  •WhentheRITfunctionisON,theautotunefunc-
tion changes the RIT frequency, not the displayed
frequency.
RX CALL SIGN CAPTURE KEY Operation
(p. 5-6)
(Mode: DV, when the DR mode is selected)
 Push to open the “RX>CS” screen.
Push again to return to the previous screen.
 Hold down for 1 second to set the received call
signs (station and repeaters) as the operating
call sign.
@1
TRANSMIT FREQUENCY CHECK KEY
XFC
During split frequency or repeater operation, hold
down to listen to the transmit frequency. (AI sec. 4)
  •Whileholdingdownthisswitch,thetransmitfrequen-
cy can be changed with the Dial or
MPAD
.
  •WhentheSplitLockfunctionisturnedONintheSplit
operation, hold down
XFC
to cancel the Dial lock
function.
When operating simplex, hold down to monitor
the frequency.
  •Whileholdingdownthiskey,thesquelchisopenand
the interference reject function is temporarily turned
OFF.
When operating simplex and the RIT function is
turned ON, hold down to listen to the transmit fre-
quency. The frequency is the same as when the
RIT is OFF.
In the DV mode, hold down this key to select the
RX monitoring mode. (p. 6-3)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7100 in the language / languages: English as an attachment in your email.

The manual is 25,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info