670168
11
Zoom out
Zoom in
Previous page
1/96
Next page
1
PANEL DESCRIPTION
1-7
q TX ICON
Indicates either the displayed frequency can be
transmitted, or not.
appears while the operating frequency is in
an amateur band.
appears while the operating frequency is
not in an amateur band. However, when the “Band
Edge Beep” item is set to “OFF” in the “Function”
Set mode (p. 6-5), “ ” does not appear.
SET
> Function > Band Edge Beep
“LMT” appears while the output power is de-
creased because the Power FET’s temperature
is high.
“HOT” appears while transmission is inhibited be-
cause the Power FET’s temperature is too high.
w MODE ICONS (p. 3-17)
Displays the selected operating mode.
•“-D”appearswhenSSBdata,AMdataorFMdata
mode is selected.
Touch to enter the Mode selection screen.
•OntheModeselectionscreen,touchtheblocktose-
lect the operating mode.
e PASSBAND WIDTH ICON (AI sec. 5)
Graphically displays the passband width for twin
PBT operation and the center frequency for IF shift
operation.
r TONE SQUELCH/DIGITAL SQUELCH ICONS
(Mode: FM)
 ➥“TONE” appears when the repeater tone function
is ON. (AI sec. 4)
 ➥“TSQLappearswhenthetonesquelchfunction
is ON. (AI sec. 4)
 ➥“DTCS” appears when the DTCS function is ON.
(AI sec. 4)
(Mode: DV)
 ➥“DSQL”appearswhenthedigitalcallsignsquelch
function is ON. (AI sec. 9)
 ➥“CSQL”appearswhendigitalcodesquelchfunc-
tion is ON. (AI sec. 9)
t IF FILTER ICON (AI sec. 5)
Shows the selected IF filter.
Touch to select one of three IF filter settings.
  •Theselectedlterpassbandwidthandshiftingvalue
are displayed for 2 seconds in the window.
Touch for 1 second to display the “FILTER” screen
to adjust the filter passband width.
When the “FILTER” screen is displayed, touch for 1
second to return to the previous screen.
y QUICK TUNING ICON (p. 3-8)
AppearswhentheQuicktuningmodeisselected.
 •WhenZ is displayed, the frequency changes in preset
kHz or 1 MHz quick tuning steps.
 •When“Z” is not displayed, the frequency changes in 10
Hz or 1 Hz steps.
u GPS ICON (AI sec. 10)
➥ Appears when valid position data is received from
a GPS receiver that is connected to the [DATA1]
jack.
➥Blinks when invalid data is received from the GPS
receiver.
i SD CARD ICON
appears when an SD card is inserted.
and alternately blinks while accessing the
SD card.
Controller — Function display
q w e tr iy u
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7100 in the language / languages: English as an attachment in your email.

The manual is 25,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info