670168
8
Zoom out
Zoom in
Previous page
1/96
Next page
1
PANEL DESCRIPTION
1-4
!2 NOISE BLANKER KEY
NB
(AI sec. 5)
(Mode: SSB/CW/RTTY/AM)
Push to turn the noise blanker ON or OFF.
The noise blanker reduces pulse-type noise such
as that generated by vehicle ignition systems. The
noise blanker is not effective for non-pulse-type
noise.
  •“NB”appearswhenthenoiseblankerisON.
Hold down for 1 second to display the “NB” screen.
Push to return to the previous screen.
!3 KEY SPEED/CW PITCH ADJUSTMENT KEY
SPEED/PITCH
(AI sec. 4, 6)
Push to open the Key speed/CW pitch adjustment
display.
 •Rotate[M-CH] to adjust the keying speed of the inter-
nal electronic CW keyer to between 6 wpm (minimum)
and 48 wpm (maximum).
 •Rotate [BANK]
to shift the received CW audio pitch
and the CW sidetone pitch without changing the operat-
ing frequency.
 •TheCWpitchcanbeadjustedfrom300to900Hzinap-
proximately 5 Hz steps.
 •Pushagaintoclosethewindow.
!4 NOISE REDUCTION KEY
NR
(AI sec. 5)
Push to turn DSP noise reduction ON or OFF.
  •“NR”appearswhennoisereductionisON.
Hold down for 1 second to display the “NR” screen.
Push to return to the previous screen.
  •Rotate the Dial to adjust the DSP noise reduction
level. Set for maximum readability.
!5 PREAMP•ATTENUATOR KEY
P.AMP
ATT
PREAMP KEY Operation (AI sec. 5)
(Frequency band: HF, 50/70 MHz)
 Push to select one of two receive RF preampli-
fiers, or to bypass them.
  •“P.AMP1”isawidedynamicrangepreamplier.Itis
most effective for the 1.8 to 21 MHz bands.
  •“P.AMP2”isahigh-gainpreamplier.Itismosteffec-
tive for the 24 to 70 MHz bands.
  •Noindicatorappearswhenthepreampliersarenot
selected.
What is the preamplifier?
The preamplifier amplifies signals in the front end
to improve the S/N ratio and sensitivity. Select “P.
AMP1” or “P. AMP2” when receiving weak sig-
nals.
(Frequency band: 144/430 MHz)
 Push to turn the preamplifier ON or OFF.
  •“P.AMP”appearswhenthepreamplierisON.
ATTENUATOR KEY Operation (AI sec. 5)
➥ Hold down for 1 second to turn ON the attenu-
ator.
  •“ATT”appearswhentheattenuatorisON.
 Push to turn OFF the attenuator.
  •“ATT”disappears.
What is the attenuator?
The attenuator prevents a desired signal from be-
ing distorted when very strong signals are near it,
or when very strong electromagnetic fields, such
as from a broadcasting station, are near your lo-
cation.
Controller — Front panel (Continued)
PBT RIT
TX / RX
PWR
AF RF/SQL
CLR
M-CH BANK
RIT
TUNER/CALL
MENU
MIC/RF PWR
NB
SPEED/PITCH
SET
QUICK
NOTCH
DR
AUTO
TUNE
RX
CS
XFC
SPEECH
MPAD
NR
P.AMP
ATT
i7100
!2 !4!3
!5
!7 !8!6 @0 @1!9
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-7100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-7100 in the language / languages: English as an attachment in your email.

The manual is 25,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info