12316
6
Zoom out
Zoom in
Previous page
1/75
Next page
FFuunnccttiioonn sswwiittcchheess
D
MM11 FFUUNNCCTTIIOONNSS
SSPPLLIITT OOPPEERRAATTIIOONN
(p. 29)
Toggles the split function ON and OFF.
•“äappears when the split function is ON.
The function of [F-3] changes to XFC when the
split function is ON.
VVFFOO AA//BB SSEELLEECCTTIIOONN
(p. 16)
Toggles between VFO A and VFO B in
VFO mode.
Toggles between transmission VFO and
reception VFO during split operation.
Toggles between the transmit and
receive frequencies (and modes) of
memory channels when the split func-
tion is turned ON.
VVFFOO EEQQUUAALLIIZZAATTIIOONN
(p. 16)
Equalizes the frequency and operating
mode of the two VFOs.
The rear (undisplayed) frequency and operat-
ing mode are equalized to the front (displayed)
VFO frequency and operating mode.
TTRRAANNSSMMIITT FFRREEQQUUEENNCCYY CCHHEECCKK
(p. 29)
Appears when the split function is turned
ONmonitors the transmit frequency
when pushed and held.
While pushed, the transmit frequency can be
changed with the main dial.
D
MM22 FFUUNNCCTTIIOONNSS
MMEEMMOORRYY WWRRIITTEE
(p. 40)
Stores the displayed frequency and oper-
ating mode into the displayed memory
channel.
MMEEMMOORRYY TTRRAANNSSFFEERR
(p. 41)
Transfers the frequency and operating
mode in the selected memory channel to a
VFO.
VVFFOO//MMEEMMOORRYY
(p. 39)
Toggles between VFO and memory
modes.
MMEEMMOORRYY CCLLEEAARR
(p. 39)
Clears the selected memory channels
contents.
•“} appears.
D
MM33 FFUUNNCCTTIIOONNSS
NNAARRRROOWW FFIILLTTEERR
(p. 23)
Toggles the narrow filter (or wide
lterpush for 2 sec.) ON and OFF.
•“ãappears when the narrow lter is ON; ç
appears when the wide lter is ON.
An optional narrow lter and presetting in initial
set mode (p. 51) is necessary to use the fol-
lowing:
CW/RTTY narrow: FL-100, FL-101 or FL-232
SSB narrow: FL-223
SSB wide: FL-103
NNOOIISSEE BBLLAANNKKEERR
(p. 21)
Turns the noise blanker ON and OFF.
The noise blanker does not function in FM and
WFM modes; the AM Noise blanker item in
initial set mode must be set to ON for the noise
blanker to work in AM mode (p. 53).
MMEETTEERR SSEELLEECCTTIIOONN
(p. 25)
Selects the type of meter displayed (dur-
ing transmit) in the function display.
Power, ALC or SWR metering can be selected.
Only an S-meter is available for receive.
D
MM44 FFUUNNCCTTIIOONNSS
DURING SSB/AM OPERATION:
DURING CW OPERATION:
DURING RTTY OPERATION:
DURING FM OPERATION:
F-3
MET
F-2
MCL
F-3
V/M
F-2
MÜV
F-3
XFC
F-3
A=B
3
1
PANEL DESCRIPTION
MENU
M3
F-1
FIL
F-2
NB
F-3
MET
MENU
M4
F-1
VOX
F-2
COM
F-3
AGC
MENU
M4
F-1 F-2
BRKi/4
F-3
AGC
MENU
M2
F-1
MW
F-2
MÜV
MCL
F-3
V/M
(in memory mode)
MENU
M4
F-1
1/4
F-2 F-3
AGC
MENU
M4
F-1
VOX
F-2
TSQ
F-3
TON
MENU
M1
F-1
SPL
F-2
A/B
XFC
F-3
A=B
IC-706MKIIG.qxd 02.3.27 13:53 Page 3
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-706MKIIG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-706MKIIG in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info