12316
4
Zoom out
Zoom in
Previous page
1/75
Next page
FFrroonntt ppaanneell
q
PPOOWWEERR SSWWIITTCCHH [[PPOOWWEERR]]
(p. 15)
Turns power ON and OFF.
Push momentarily to turn power ON.
Push for 2 sec. to turn power OFF.
w
AAFF GGAAIINN CCOONNTTRROOLL [[AAFF]]
(inner control; p. 15)
Rotate clockwise to increase the audio output from
the speaker; rotate counterclockwise to decrease
the audio output from the speaker.
e
RRFF GGAAIINN CCOONNTTRROOLL//SSQQUUEELLCCHH CCOONNTTRROOLL
[[RRFF//SSQQLL]]
(outer control; p. 22)
Adjusts the squelch threshold level (to mute
noise when receiving no signal) in all modes.
This control can be used for RF gain control to
adjust receiver gain manually.
RF gain selection can be set in initial set mode (p. 50).
RF gain is usable in SSB/CW/RTTY modes only.
r
FFUUNNCCTTIIOONN DDIISSPPLLAAYY
Shows the operating frequency, dot matrix indica-
tions, selected memory channel, etc. See p. 7 for
details.
t
TTUUNNIINNGG SSTTEEPP SSWWIITTCCHH [[TTSS]] ((
pgs. 17, 18)
Push momentarily to cycle between 1 Hz/10 Hz,
programmable and 1 MHz tuning steps.
1 and 10 Hz steps are only available in SSB, CW and
RTTY modes; 1 MHz steps are only available in FM,
WFM and AM modes.
Push for 2 sec. to toggle between 1 and 10 Hz
steps, or; when the programmable tuning steps is
indicated, push for 2 sec. to enter programmable
tuning step mode.
y
MMOODDEE SSWWIITTCCHH [[MMOODDEE]]
(p. 19)
Push momentarily to cycle through the operating
modes:
USB/LSB CW/CWå RTTY/åRTTY
FM/WFM/AM
Push and hold for 2 sec. to toggle between the
following operating modes:
USB LSB
CW CWå
RTTY åRTTY
FM WFM AM FM, etc.
u
RREECCEEIIVVEE//TTRRAANNSSMMIITT IINNDDIICCAATTOORRSS [[RRXX]]//[[TTXX]]
[RX] lights green while receiving (and squelch
opens); [TX] lights red while transmitting.
i
MMAAIINN DDIIAALL
Changes the displayed frequency, selects initial set
mode items, etc.
o
UUPP//DDOOWWNN ((BBAANNDD)) SSWWIITTCCHHEESS [[
Y
//
Z
((BBAANNDD))]]
Push to select a band.
Can also be used to advance quick set mode items,
initial set mode items, etc.
Push and hold to scroll through the bands con-
tinuously.
!0
MMAAIINN DDIIAALL TTEENNSSIIOONN LLAATTCCHH
Selects the main dial tension.
2 positions are available.
!1
MMIICCRROOPPHHOONNEE CCOONNNNEECCTTOORR
(p. 8)
Modular-type microphone connector—connects
the supplied microphone (HM-103).
The optional OPC-589 can be used to connect an 8-pin
microphone such as the SM-8 or SM-20, if desired.
A microphone connector is also available on the rear
1
1
PPAANNEELL DDEESSCCRRIIPPTTIIOONN
HF/VHF/UHF TRANSCEIVER
i706MK™G
AF
RIT/
SUB
MENU F-1 F-2 F-3
MODE
BAND
BAND
Y
Z
TS
DISPLAY
LOCK
RX
TX
M-CH
PHONES
TUNER/CALL
P.AMP/ATT
POWER
SHIFT
RF/SQL
q
w e
r
t
y
i
o
o
!1
!2!3!4!5!6!7!8
!9
@0
@2
@1
!0
u
CH
VFO A
P
O
S1
5
53792040
10
60dB
USB
M1
SPL
A/B A=B
IC-706MKIIG.qxd 02.3.27 13:53 Page 1
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-706MKIIG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-706MKIIG in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info