12316
7
Zoom out
Zoom in
Previous page
1/75
Next page
4
1
PANEL DESCRIPTION
VVOOXX FFUUNNCCTTIIOONN
(p. 26)
Toggles the VOX function ON and OFF.
The [VOX GAIN] and [ANTI VOX] are available
on the side panel.
VOX delay can be set in quick set mode
(p. 48).
SSPPEEEECCHH CCOOMMPPRREESSSSOORR
(p. 26)
Toggles the speech compressor ON and
OFF.
The [COMP GAIN] control is available on the
side panel.
AAGGCC
(p. 21)
Changes the time constant of the AGC cir-
cuit.
BBRREEAAKK--IINN
(p. 33)
Selects semi break-in, full break-in (QSK)
and break-in OFF
•“BK or F-BK appears when selecting semi
break-in or full break-in, respectively.
An external switch, such as a foot switch, is
necessary to connect to the ACC socket (pin
3, pin 7 or RTTY SENDsee p. 35) to use no
break-in operation.
11//44 FFUUNNCCTTIIOONN
(p. 36)
Toggles the 1/4 function ON and OFF.
When the
1
4 function is ON, a bar appears
under the
1
4 indication and ne tuning can be
used.
TTOONNEE SSQQUUEELLCCHH
(p. 31)
Toggles the tone squelch function ON and
OFF (a tone squelch frequency must be
selected in Quick Set mode).
•“FM-TSQL appears when the function is ON.
RREEPPEEAATTEERR TTOONNEE OOPPEERRAATTIIOONN
(p. 30)
Toggles the subaudible tone encoder
for repeater use ON and OFF.
•“FM-T appears when the function is ON.
Transmits a 1750 Hz tone burst when
pushed and held during transmission.
Tone frequencies or tone burst can be set in
initial set mode (p. 49).
D
SS11 FFUUNNCCTTIIOONNSS
MMEEMMOORRYY WWRRIITTEE
(p. 40)
Stores the displayed frequency and oper-
ating mode into the displayed memory
channel.
MMEEMMOO PPAADD WWRRIITTEE
(p. 42)
Stores the displayed frequency and oper-
ating mode into a memo pad.
MMEEMMOO PPAADD RREEAADD
(p. 42)
Calls up a memo pad.
D
SS22 FFUUNNCCTTIIOONNSS
SSCCAANN
(p. 44)
Starts and stops the scan function.
PPRRIIOORRIITTYY WWAATTCCHH
(p. 44)
Starts and stops priority watch.
SSEELLEECCTT SSCCAANN
(p. 44)
Toggles the select setting ON and OFF for
the selected memory channel.
VVFFOO//MMEEMMOORRYY
(p. 44)
Toggles between VFO and memory
modes.
D
SS33 FFUUNNCCTTIIOONNSS
QQUUIICCKK BBAANNDD CCHHAANNGGEE FFUUNNCCTTIIOONN
(p. 19)
This item provides access to the band stacking regis-
ter. By default the 7, 50 and 144 MHz bands are dis-
played. Push [F-1] to [F-3] for 2 sec. to select a new
band if desired.
A mode is memorized along with the frequency for each
band.
D
SS44 FFUUNNCCTTIIOONNSS
(may be optional for some ver.)
AAUUTTOOMMAATTIICC NNOOTTCCHH FFIILLTTEERR
(p. 24)
This function automatically attenuates beat
tones, tuning signals, etc., even if they are
moving.
NNOOIISSEE RREEDDUUCCTTIIOONN
(p. 24)
This function reduces noise components
and picks out desired signals which are
buried in the noise.
NNOOIISSEE RREEDDUUCCTTIIOONN DDIISSPPLLAAYY
(p. 24)
This displays the noise reduction level
when using the noise reduction function.
F-3
TON
F-1
1/4
F-3
AGC
F-1
VOX
MENU
S1
F-1
MW
F-2
MPW
F-3
MPR
MENU
S2
F-1
SCN
F-2
PRI
SEL
F-3
V/M
(in memory mode)
MENU
S3
F-1
7
F-2
50
F-3
144
MENU
S4
F-1
ANF
F-2
NR
F-3
NRL
IC-706MKIIG.qxd 02.3.27 13:53 Page 4
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-706MKIIG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-706MKIIG in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info