12316
8
Zoom out
Zoom in
Previous page
1/75
Next page
5
1
PANEL DESCRIPTION
RReeaarr aanndd ssiiddee ppaanneellss
q
GGRROOUUNNDD TTEERRMMIINNAALL [[GGNNDD]]
(p. 9)
Connect this terminal to a ground to prevent electri-
cal shocks, TVI, BCI and other problems.
w
AANNTTEENNNNAA CCOONNNNEECCTTOORRSS [[AANNTT 11]],, [[AANNTT 22]]
(p. 11)
Accept a 50 antenna with an PL-259 type plug.
[ANT 1] is for connection to an HF/50 MHz antenna.
[ANT 2] is for connection to 144 MHz antenna.
These connectors are switched above or below 60 MHz.
e
DDAATTAA JJAACCKK [[DDAATTAA]]
(p. 12)
6-pin min DIN jack to connect a TNC, etc. for packet
operation.
r
AACCCCEESSSSOORRYY SSOOCCKKEETT [[AACCCC]]
(p. 6)
Enables connection to external equipment such as
a TNC for data communications, a linear amplier or
an automatic antenna selector/tuner, etc.
See page at right for socket information.
t
RRTTTTYY JJAACCKK [[RRTTTTYY]]
(p. 35)
Connects an external terminal unit for RTTY (FSK)
operation.
The keying polarity and mark/shift frequencies can be
selected in quick set mode (p. 48).
y
CCII--VV RREEMMOOTTEE CCOONNTTRROOLL JJAACCKK [[RREEMMOOTTEE]]
(p. 45)
Designed for use with a personal computer for
remote operation of transceiver functions.
u
MMIICCRROOPPHHOONNEE CCOONNNNEECCTTOORR [[MMIICC]]
(p. 11)
Accepts the supplied microphone (connected in
parallel with the front panels [MIC] connector).
See pgs. 1 and 2 for microphone notes.
See p. 8 for microphone connector information.
i
EELLEECCTTRROONNIICC KKEEYYEERR JJAACCKK [[KKEEYY]]
(p. 33)
Accepts a paddle to activate the internal electronic
keyer.
Selection between the internal electronic keyer and
straight key operation can be made in quick set mode.
(p. 49)
o
DDCC PPOOWWEERR SSOOCCKKEETT [[DDCC1133..88VV]]
(p. 13)
Accepts 13.8 V DC through the supplied DC power
cable.
!0
EEXXTTEERRNNAALL SSPPEEAAKKEERR JJAACCKK [[EEXXTT SSPP]]
(p. 12)
Accepts a 416 speaker.
!1
TTUUNNEERR CCOONNTTRROOLL SSOOCCKKEETT [[TTUUNNEERR]]
(p. 12)
Accepts the control cable from an optional AH-3
HF
AUTOMATIC ANTENNA TUNER
.
!2
SSPPEEEECCHH CCOOMMPPRREESSSSIIOONN LLEEVVEELL CCOONNTTRROOLL
[[CCOOMMPP GGAAIINN]]
(p. 26)
Adjusts the compression level.
This control is available only when the speech compres-
sor is ON.
COMP
GAIN /SIDE T
BEEP
DC 13.8V
EXT SP
MIC
KEY
TUNER
ANT 1
ANT 2
GND
q
w
er ui
o
!2 !3
!0!1
ty
When connecting
a straight key
When connecting
a paddle
(dot)
(com)
(dash)
()
Rear panel view
Recommended
level
Counterclockwise
decreases
Clockwise
increases
COMP
GAIN /SIDE T
BEEP
IC-706MKIIG.qxd 02.3.27 13:53 Page 5
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Icom IC-706MKIIG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Icom IC-706MKIIG in the language / languages: English as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info