627057

Huvema CRDM 3050 X 2000 TOPLINE Manual

17
Zoom out
Zoom in
Previous page
1/36
Next page
17
7.9 spIndelgetrIebe nach rechts oder lInks schwenken
• Schalter 1 (Abb. links) drücken. Taster loslassen, wenn sich die Pfeilspitze auf Punkt B (siehe oben rechts)
befindet. Die Klemmvorrichtung ist nun entriegelt.
• Für ein Schwenken nach rechts das Handrad im UZS drehen und für ein Schwenken nach links das Handrad
entgegen den UZS drehen (Abb. links).
• Taster 2 (unten links) drücken. Taster loslassen, wenn sich die Pfeilspitze auf Punkt A (siehe oben rechts)
befindet. Die Klemmvorrichtung ist nun verriegelt.
Nach Betätigen des Tasters UNLOCK (entriegeln) kann der Ausleger nicht nur nach links und rechts
schwenken, sondern sich auch vor- und zurückbewegen.
7.10 ausleger vor- oder zurückbewegen
• Schalter 1 (unten links) drücken. Taster loslassen, wenn sich die Pfeilspitze auf Punkt B (siehe oben rechts)
befindet. Die Klemmvorrichtung ist nun entriegelt.
• Den Auslegerbedienhebel nach hinten drücken, um den Ausleger (laut Abb. 3) nach hinten zu bewegen. Den
Auslegerbedienhebel nach vorne ziehen, um den Ausleger (laut Abb. 3) nach vorne zu bewegen.
• Schalter 2 (unten links) drücken. Taster loslassen, wenn sich die Pfeilspitze auf Punkt A (siehe oben rechts)
befindet. Die Klemmvorrichtung ist nun verriegelt.
Nach Betätigen des Tasters UNLOCK (entriegeln) kann der Ausleger nicht nur nach links und
rechts schwenken, sondern sich auch vor- und zurückbewegen. Ist eine Drehung des Auslegers
um 180° erforderlich, dann muss der Boden so, wie in Kapitel 3 beschrieben, vorbereitet und der
Maschinenfuß mit dem Boden verdübelt sein.
5-15
5.9 Rotate the Gearbox right or leftwards.
5.9.1
（For TPR-1230,TPR-1230H）
1.
Press the figure1 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to B. The clamping device is released now.
2.
Rotate the hand wheel clockwise to move rightwards and counter clockwise to move
leftwards, as shown in up left picture.
3.
Press the figure 2 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to A. The clamping device is tightened now.
Precaution：
After UNLOCK pressed, the Arm can move for and backwards in addition to
move left and right wards.
5.9.2（
For TPR-1600H/ TPR-2000H）
1.
Press the figure1 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to B. The clamping device is released now.
2.
Rotate the hand wheel clockwise to move rightwards and counter clockwise to move
leftwards, as shown in up left picture.
3.
Press the figure 2 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to A. The clamping device is tightened now.
Precaution：
After UNLOCK pressed, the Arm can move for and backwards in addition to
move left and right wards.
5-16
5.10 Rotate the arm forward or backwards.
5.10.1 (For TPR-1230,TPR-1230H)
1.
Press the figure1 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to B. The clamping device is released now.
2.
Push the arm moving lever backwards to move the arm backwards, as shown in figure 3. Pull the
arm moving lever towards to move the arm towards, as shown in figure 3.
3
.
Press the figure2 shown in the bottom left. Referring to the up right picture, release the button
after pointing the arrowhead to A. The clamping device is tightened now.
Precaution：
After UNLOCK pressed, the Arm can move for and backwards in addition to move left and
right wards. If 180 degree rotation is needed, the ground needs to be processed according the
method in the chapter 3, where the base bolts are required and need to be fastened by nuts.
5.10.2（FOR TPR-1600H, TPR-2000H）
1.
Press the figure1 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrow head to B. The clamping device is released now.
2.
Push the arm moving lever backwards to move the arm backwards, as shown in figure 3.
Pull the arm moving lever towards to move the arm towards, as shown in figure 3.
3.
Press the figure2 shown in the bottom left. Referring to the up right picture, release the
button after pointing the arrowhead to A. The clamping device is tightened now.
Precaution：
After UNLOCK pressed, the Arm can move for and backwards in addition to move
left and right wards. If 180 degree rotation is needed, the ground needs to be
processed according the method in the chapter 3, where the base bolts are required
and need to be fastened by nuts.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema CRDM 3050 X 2000 TOPLINE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema CRDM 3050 X 2000 TOPLINE in the language / languages: German as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info