627057

Huvema CRDM 3050 X 2000 TOPLINE Manual

18
Zoom out
Zoom in
Previous page
1/36
Next page
18
7.11 spIndeldrehzahl ändern
Ein Spindelbetrieb in hoher Spindeldrehzahlstufe ohne Pinolenbewegung lässt die
Spindeltemperatur unzulässig ansteigen und verursacht Betriebsstörungen. Deswegen niemals die
Spindel in hoher Drehzahlstufe ohne Pinolenbewegung betreiben!
7.11.1 drehzahlmesser
Auswahl von zwei Geschwindigkeitsstufen 1 2
Drehzahl U/min H (Schnelllauf) 1890 1010 475 220 115 55
L (Langsamlauf) 1330 715 335 155 80 35
Bohrdurchmesser (mm) Kohlenstoffstahl Ø1-Ø6 Ø6-Ø24 Ø14-Ø24 Ø24-Ø36 Ø36-Ø50 Ø50-Ø66
Gusseisen Ø1-Ø8 Ø8 Ø30 Ø18-Ø30 Ø30-Ø44 Ø44 Ø60 Ø60-Ø78
7.11.2 drehzahlschalter
Abb. 1 Abb. 2 Abb. 3
a. Schritt 1
b. Schritt 2
c. 2-Stufen-Drehzahlwahlhebel
d. Referenzpunkt für Stufe 1.
e. Referenzpunkt für Stufe 2.
f. 3-Stufen-Drehzahlwahlhebel
g. Tachometer
h. Drehzahlanzeige schnell / langsam
i. Hi-Lo-Drehzahlwahlhebel (schnell / langsam)
j. Referenzpunkt für Hi-Lo-Drehzahl schnell / langsam
Die Drehzahl wie folgt ändern:
Schritt Beschreibung
a. Spindelbetrieb stoppen.
b. Not-Aus-Schalter drücken.
c. Aus der Tabelle die geeignete Drehzahl auswählen.
d. Den 2-Stufen-Drehzahlwahlhebel (Abb. 1, Pos. c) in die gewünschte Position stellen.
(gewünschte Stufe auswählen)
e. Den 3-Stufen-Drehzahlwahlhebel in die gewünschte Position stellen. Befindet sich der 2-Stufen-
Drehzahlwahlhebel auf Stufe 1, dann entspricht die Drehzahl dem Referenzpunkt von Schritt 1
(Abb. 2, Pos. d). Befindet sich im Gegensatz dazu der 2-Stufen-Drehzahlwahlhebel auf Stufe 2, dann
entspricht die Drehzahl dem Referenzpunkt von Schritt 2 (Abb. 2, Pos. e).
f. Den Drehzahlwahlhebel schnell / langsam in die gewünschte Position stellen.
5-20
5.11.2（
For TPR-1600H/ TPR-2000H）
Ⅰ.Speedometer（For TPR-1600H/ TPR-2000H）
Two step choice 1 2
H (hi-speed)
1890 1010 475 220 115 55
Speed（
rpm）
L (lo-speed) 1330 715 335 155 80 35
Medium Carbon steel
∅1-∅6 ∅6-∅24 ∅14-∅24 ∅24-∅36 ∅36-∅50 ∅50-∅66
Applicable
diameter mm
Cast iron
∅1-∅8 ∅8-∅18 ∅18-∅30 ∅30-∅44 ∅44-∅60 ∅60-∅78
Ⅱ. speed switch（For TPR-1600H/ For TPR-2000H）
Fig.1.
Fig.2. Fig.3.
The relevant names
The relevant names The relevant names
a. Step 1
d.
Ref. Point for the
step 1.
h.
Hi-lo speed
indicator
b. Step 2
e.
Ref. Point for the
step 2.
i.
Hi-lo speed
changing lever
c. Two speed lever
f.
Three step speed
changing lever
j.
Hi-lo speed
reference point
g. Speedometer
（
FOR TPR-1600H/ TPR-2000H）
The way to switch speed follows as:
Step Description
a.
Stop rotation of the spindle.
b. Press down the emergency button.
c. Check the speedometer and select the suitable speed.
d.
Switch the two step speed changing lever (as mark c in the fig. 1.) to the required
position. (Select the required step)
e.
Switch the three step speed changing lever to the required position. When the two step
speed changing lever is at the step 1, the speed will be based on the reference point of
the step 1 (as mark d in the fig. 2). On the contrary, when the two step speed changing
lever is at the step 2, the speed will be based on the reference point of the step 2 (as
mark e in the fig. 2).
f. Switch the Hi-lo speed changing lever to the required position.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema CRDM 3050 X 2000 TOPLINE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema CRDM 3050 X 2000 TOPLINE in the language / languages: German as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info